À propos · Caterpillar 907Aperçu
The Caterpillar 907 is a compact wheel loader in the sub-6-tonne class, offering an operating weight of 5,815 kg and an engine output of 70 hp. With a rated bucket capacity of 1 m³, the machine occupies the upper boundary of the small wheel loader segment, where maneuverability and general-purpose loading capacity are the primary considerations. It carries the engineering standards and dealer-network depth associated with the Caterpillar brand into a size class that serves a broad range of light-to-medium duty cycles.
Applications typiquesLieu d'utilisation de cette machine
Compact wheel loaders of this class are routinely deployed on construction sites, municipal maintenance operations, agricultural yards, and recycling or waste-transfer facilities where a full-size loader would be impractical. The 1 m³ bucket capacity suits repetitive short-cycle loading of aggregates, topsoil, sand, and similar bulk materials. Restricted-access jobsites, indoor warehousing operations, and utility groundwork represent additional common use contexts for machines in this weight and power bracket.
Inspection du marché de l'occasionCe qu'il faut vérifier avant d'acheter
Pre-purchase inspection of a used Caterpillar 907 should follow standard compact wheel loader protocol. Hydraulic systems warrant particular attention: check for cylinder seal weep, hose condition, and smooth boom and bucket actuation throughout the full range of movement. Inspect the articulation joint, steering linkage, and axle seals for play or leakage, as these are high-stress points on all articulated loaders in this class. Verify that the hour meter reading is consistent with overall wear on pedals, seat, and bucket lip, and confirm the service history where available. Tire condition and remaining tread depth have a meaningful effect on both operational readiness and residual value and should be assessed independently. Buyers considering machines with attachments should confirm that auxiliary hydraulic flow specifications match those of the intended tooling.
Marché actuelPosition tarifaire
Within the sub-6-tonne compact wheel loader class, the Caterpillar 907 is most frequently cross-shopped against the JCB 409 and the Volvo L35. The 907's operating weight of 5,815 kg places it marginally heavier than both named competitors, which influences ground pressure, stability under load, and suitability for softer underfoot conditions. At 70 hp, its engine output sits in the same general band as the JCB 409 and Volvo L35, making raw power a secondary differentiator; buyers typically weigh factors such as attachment compatibility, dealer service coverage, and operator ergonomics when choosing between these three models. Within any used-market price band for the 907, the primary attributes that move a specific unit toward the upper or lower end of that band are recorded operating hours, overall mechanical and cosmetic condition, configuration, and the presence of additional attachments such as forks, buckets with cutting edges, or auxiliary hydraulic lines.
