Wheel LoaderEurope

JCB 403

2,506 kg36 hpMoyenne du marché €29k · 3 annonces · 1 sous le prix du marché

Vue de côtéJCB 403
JCB 403 side elevation
Poids en ordre de marche
2,506 kg
Longueur
4,175 mm
Fig · proportionnel à la fiche technique · chargeuse sur pneus
Marché en direct

3 prix demandés actifs en Europe

Moyenne du marché€29k

Les prix de vente se situent entre €24k et €35k, environ 42% en dessous de la moyenne du marché.

NL
€107k
DK
€91k
PL
€51k
BE
€48k
DE
€42k
  • 2017NL · nom du concessionnaire masqué€20k
Basé sur 3 annonces de concessionnaires récemment consultées.Au 15 Sept 2026

Ce modèle se situe 47% en dessous de de la moyenne de classe sur 113 modèles comparables.

Combien coûte un JCB 403 d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de JCB 403 d'occasion vont actuellement de 23 650 € à 34 540 €, la moyenne du marché se situant autour de 29 050 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 3 annonces actives, mises à jour quotidiennement.

Envoi privé

Envoyez-moi par e-mail le JCB 403 sous-évalué de cette semaine.

1 annonce sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

MarqueJCB
Modèle403
Spécifications · Comparaison

Comment le 403 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

En un coup d'œil
Classe de poids
2.5 t
3 t
2 t
Puissance
Moteur
Kubota V1505
Yanmar 3TNV80FT
Yanmar 3TNV80F (1331 cm3, Stage V)
Puissance
36 hp
25–54.5 hp
25 hp
Dimensions
Poids en ordre de marche
2,506 kg
2,900–3,100 kg
1,950 kg
Longueur
4,175 mm
4,420–4,581 mm
4,050 mm
Largeur
1,411 mm
1,040 mm
1,240 mm
Hauteur
2,201 mm
2,300–2,400 mm
2,170 mm
Plage de travail
Capacité du godet
0.3 m³
0.4 m³
0.35 m³
Force d'arrachement
16 kN
11.6 kN
Hauteur de levage
2,884 mm
2,690–2,880 mm
2,680 mm
Transmission
Vitesse de déplacement
30 km/h
20–30 km/h
20 km/h
Marché
Prix demandé moyen · UE
€29k
€76k
€34k
Fourchette de prix
€24k€35k
€76k€76k
€28k€42k
Annonces actives
3
1
3
Spécifications · fiches techniques du fabricantPrix · annonces récentes des concessionnaires, fenêtre glissante
À propos · JCB 403

Aperçu

The JCB 403 is a compact wheel loader in the sub-3-tonne class, with an operating weight of 2506 kg and an engine output of 36 hp. It is equipped with a 0.3 m3 bucket and is designed for tight-site material handling where a full-size wheel loader would be impractical. As a JCB product it carries the brand recognition and dealer network typical of a mainstream European OEM in this segment.

Applications typiques

Lieu d'utilisation de cette machine

Compact wheel loaders in this weight class are routinely deployed on agricultural holdings, equestrian centres, small construction sites, and municipal maintenance operations. Their combination of manoeuvrability and lifting capacity makes them suited to stockpile management, yard cleaning, and loading tasks where site access or floor-loading restrictions limit larger machines. The 0.3 m3 bucket capacity is well matched to bulk materials such as woodchip, sand, manure, and gravel in volumes typical of small-to-medium daily operations.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

When inspecting a compact wheel loader of this type, begin with the loader arms and pivot points, checking for play in the pins and bushings and for any signs of weld repair or cracking in high-stress areas. Inspect the bucket cutting edge and side plates for wear, as replacement frequency reflects actual working intensity. Check hydraulic hoses and cylinder seals for weeping, particularly at the tilt and lift rams. On the drivetrain, assess axle breather condition and listen for transmission noise under load. Tyre condition is a meaningful cost indicator at purchase, so assess tread depth and sidewall integrity on all four wheels. Confirm that any quick-coupler mechanism engages and releases correctly and that safety locks function as intended. Request service records to verify oil and filter change intervals, and confirm that the cooling system is clean and free of contamination, which is especially relevant on machines used in dusty or organic-material environments.

Marché actuel

Position tarifaire

In the sub-3-tonne compact wheel loader segment, the JCB 403 is most directly cross-shopped against the Weidemann 1390 and the Kramer 5035. The Weidemann 1390 is a specialist compact loader with a strong following in livestock and stable environments, often perceived as purpose-built for agricultural interiors. The Kramer 5035 occupies a similar power and weight bracket and competes on versatility and attachment compatibility. The JCB 403 differentiates itself through the broader JCB parts and service infrastructure and the brand familiarity that supports residual confidence in mixed-fleet operations. Within this class, the attributes that move a machine along the value spectrum include recorded service hours, the presence and condition of a quick-coupler system, the number and type of hydraulic circuits, tyre wear and specification, and whether a bucket or wider attachment package accompanies the sale. Overall condition, provenance documentation, and cab configuration further influence where any individual unit sits relative to others of the same model.

Restez dans la fourchette

Autres modèles JCB que nous suivons

Prix demandé moyen affiché comme delta par rapport à la moyenne de la classe (€29k).

Notre équipe

Trouvez-moi un JCB 403.

Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un JCB 403. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.

Lancer une demande