Prix Manitou MT930 d'occasion : €55k–€59k en Europe

Combien coûte un Manitou MT930 d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de Manitou MT930 d'occasion vont actuellement de 54 900 € à 58 500 €, la moyenne du marché se situant autour de 56 388 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 10 annonces actives, mises à jour quotidiennement.

Sélection gratuite pour les acheteurs

Les meilleures offres disponibles pour Manitou MT930 en Europe.

Nous comparons le prix, l'année, les heures de fonctionnement et l'adéquation, puis nous vous envoyons sous 24 heures une sélection vérifiée avec des liens directs vers le vendeur.

Spécifications · Comparaison

Comment le MT930 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

Manitou

MT930

En un coup d'œil

Classe de poids

—

Puissance

Moteur

—

Puissance

—

Dimensions

Poids en ordre de marche

—

Longueur

—

Largeur

—

Hauteur

—

Plage de travail

Capacité de levage max.

—

Hauteur de levage max.

—

Portée maximale

—

Capacité de levage à portée max.

—

Transmission

Vitesse de déplacement

—

Marché

Prix demandé moyen · UE

€56k

Fourchette de prix

€55k – €59k

Annonces actives

10

À propos · Manitou MT930

Aperçu

The Manitou MT930 is a mid-range rotating telehandler built around a diesel powertrain, positioned within the broader telescopic handler segment for operators who require both reach and 360-degree slewing capability. Its rotating superstructure distinguishes it from fixed-boom telehandlers in the same lifting-capacity class, allowing precise load placement from a single setup position. The MT930 sits in a product line that Manitou has developed specifically for construction, agricultural, and industrial end-users who need versatile material handling across uneven terrain.

Applications typiques

Lieu d'utilisation de cette machine

Rotating telehandlers in this class are used extensively on building sites for placing steel, masonry, and prefabricated elements at height and offset distances that a fixed-boom machine cannot reach from available ground positions. In agricultural settings, the MT930 class handles silage, bale stacking, and grain facility work where the slewing function reduces repositioning cycles. Industrial yards, wind-energy assembly sites, and civil infrastructure projects also draw on this machine class for its combination of mobility and crane-like placement precision.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

Inspect the rotating ring gear and slewing bearing for play, uneven wear, and seal integrity, as this component is the defining mechanical element of the class and its condition directly affects operational precision and longevity. Check all hydraulic lines, cylinders, and couplings for weeping or repaired sections, paying particular attention to the rotating hydraulic circuit where joints are subject to continuous movement. Verify that outrigger pads, locking pins, and interlocks function correctly, and confirm that the load management indicator and overload cutout system respond as intended under test. Review the service record for evidence of scheduled oil and filter changes, boom chain or cylinder inspections, and any structural repairs to the chassis or boom sections. Tyre condition and matching across axles matters on this machine class because uneven wear can indicate chronic overloading or alignment issues. Where attachments are included, confirm that hydraulic flow ratings and mounting interfaces are compatible with the MT930 carrier so that no additional adaptation cost is required before the machine can enter productive service.

Marché actuel

Position tarifaire

The MT930 competes directly with rotating telehandlers from JLG, Merlo, Magni, and Liebherr, all of which contest the same specification window of lifting capacity combined with 360-degree rotation. Against fixed-boom Manitou and competitor models, the rotating configuration commands a premium position in the used market because the slewing function expands site utility and reduces the need for auxiliary craning equipment. Within the rotating-handler segment, Merlo and Magni are frequently cross-shopped because they offer comparable reach-and-rotation configurations, and buyers compare boom geometry, outrigger design, and cab specification as differentiating factors. The attributes that move a specific MT930 within its price band are accumulated hours, service history documentation, attachment inventory (forks, buckets, jib extensions, winch), whether outriggers are fitted, cab configuration, and overall structural and hydraulic condition. Machines with low hours, full dealer service records, and a matched attachment package occupy the upper end of their range, while high-hour units with limited history and worn tyres sit lower regardless of calendar age.

Comment nous analysons le marché →

Restez dans la fourchette