Articulated Dump TruckEurope

Wacker Neuson DW50

3,500 kg60 hpDonnées récentes limitées, basées sur 3 annonces plus anciennes

Vue de côtéWacker Neuson DW50
Wacker Neuson DW50 side elevation
Poids en ordre de marche
3,500 kg
Longueur
4,490 mm
Fig · proportionnel à la fiche technique · tombereau articulé
Marché en direct

Tombereau articulé · vue du marché

Moy. Tombereau articulé€80k

Ces informations sont basées sur 3 annonces plus anciennes. Les prix actuels pouvant avoir évolué, nous indiquons plutôt la fourchette de prix de la catégorie.

La plupart des prix de vente se situent entre €27k et €123k, avec une moyenne du marché autour de €80k.

NL
€94k
DK
€60k
PL
€83k
BE
€62k
CZ
€49k
Recevez une notification privée dès qu'une offre sous le prix du marché apparaît dans notre réseau européen. Liens directs vers le concessionnaire envoyés par e-mail.
Prix de vente dans notre réseau européen.Au 15 Sept 2026
Envoi privé

Envoyez-moi par e-mail le Wacker Neuson DW50 sous-évalué de cette semaine.

Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

MarqueWacker Neuson
ModèleDW50
Spécifications · Comparaison

Comment le DW50 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

 
Wacker Neuson
DW50
Hydrema
912D
Hydrema
922F
En un coup d'œil
Classe de poids
5 t
10 t
20 t
Puissance
Moteur
Deutz D 2.2 L3
Perkins 1104D-E44TA
Cummins QSB 6.7
Puissance
60 hp
129 hp
296 hp
Couple maximal
1,044 Nm
Dimensions
Poids en ordre de marche
3,500 kg
7,060 kg
15,900 kg
Longueur
4,490 mm
6,080 mm
9,140 mm
Largeur
1,915 mm
2,500 mm
2,930 mm
Hauteur
2,810 mm
2,780 mm
3,440 mm
Plage de travail
Charge utile
5,000 kg
10,000 kg
20,000 kg
Capacité de la caisse (comble)
1.97 m³
5.6 m³
12 m³
Transmission
Vitesse maximale
28 km/h
40 km/h
50 km/h
Rayon de braquage
8,340 mm
Marché
Prix demandé moyen · UE
€38k
€63k
Fourchette de prix
€38k€38k
€63k€63k
Annonces actives
3
1
1
Spécifications · fiches techniques du fabricantPrix · annonces récentes des concessionnaires, fenêtre glissante
À propos · Wacker Neuson DW50

Aperçu

The Wacker Neuson DW50 is a compact articulated dump truck with an operating weight of 3,500 kg and an engine output of 60 hp. It belongs to the light end of the articulated dump truck class, designed around a small footprint combined with the maneuverability that articulated steering provides. This size category positions it as a site support machine rather than a primary bulk-earthmoving unit, making the DW50 a recognizable tool in contractor fleets that require confined-site mobility.

Applications typiques

Lieu d'utilisation de cette machine

Compact articulated dump trucks in this weight and power class are regularly deployed on landscaping projects, utility trenching operations, and civil groundworks where restricted access rules out larger haulers. Their articulated chassis allows them to navigate tight turning radii on congested urban sites, building sites with restricted lanes, and sloped terrain where rigid-frame machines would be less effective. Agricultural drainage work, sports-field construction, and pipeline support are also common application contexts for machines of this type.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

When inspecting a used compact articulated dump truck of this class, begin with the articulation joint and associated seals, as this is the primary wear point unique to the machine type and its condition directly affects steering response and structural integrity. Check the hydraulic tipping system for smooth, full-cycle operation and inspect all hoses and cylinders for leaks or abrasion damage. Review available service records to verify that scheduled maintenance intervals have been observed, paying particular attention to transmission fluid changes and differential servicing. Examine the undercarriage, including axles and tyres, for wear consistent with the stated hours, and confirm that the hours displayed on the instrument cluster align with any available documentation. Machines used in wet or muddy conditions should be inspected carefully for corrosion in the chassis frame and around the pivot points. Where possible, conduct a test drive that includes loaded tipping to verify hydraulic performance and drivetrain function under representative conditions.

Marché actuel

Position tarifaire

Within the compact articulated dump truck segment, the Wacker Neuson DW50 is most directly cross-shopped against the Hydrema 922F and the Hydrema 912D. The Hydrema models represent a Scandinavian engineering tradition in this niche and typically carry strong brand recognition among contractors familiar with that lineage, while the DW50 competes on the basis of Wacker Neuson's broad dealer network and product integration with other compact equipment lines. At 3,500 kg operating weight and 60 hp, the DW50 sits at the lighter, lower-power end of the class, which influences buyer decisions depending on payload requirements and site access constraints. Within any cohort of DW50 machines on the used market, the attributes that drive spread between higher and lower valuations are accumulated working hours, overall mechanical and cosmetic condition, service history documentation, the presence of original attachments or optional tipping configurations, and whether the machine has been operated in corrosive or particularly abrasive environments.

Notre équipe

Trouvez-moi un Wacker Neuson DW50.

Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Wacker Neuson DW50. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.

Lancer une demande