Usato Caterpillar 906: 18 annunci in tempo reale, €33k–€70k

Quanto costa un Caterpillar 906 usato in Europa?

Tra i concessionari indipendenti europei, gli annunci di Caterpillar 906 usati vanno attualmente da € 33.284 a € 69.950, con una media di mercato intorno a € 45.669. Anno, ore di lavoro e configurazione fanno variare il prezzo all'interno di questa fascia. Sulla base di 18 annunci attivi, aggiornati ogni giorno.

Invio privato

Inviami via e-mail il Caterpillar 906 a prezzo ridotto di questa settimana.

12 annunci sotto il prezzo di mercato in questo momento. Ti rispondiamo entro 15 minuti con i risultati più pertinenti alle tue specifiche.

Specifiche · Confronto

Come si posiziona lo 906 nella sua categoria.

I concorrenti più vicini vengono selezionati automaticamente per categoria e classe di peso. Le specifiche provengono dalle schede tecniche dei produttori; i prezzi provengono dagli annunci recenti dei rivenditori.

Caterpillar

906

In sintesi

Classe di peso

6 t

5 t

Potenza

Motore

Cat C3.3B / C3.4

Liebherr D 504

Volvo D3.3J / Deutz BF4L 1011FT (early)

Potenza

68–70 hp

60–68 hp

58–75 hp

Dimensioni

Peso operativo

4,950–5,640 kg

5,240–5,835 kg

4,761–5,500 kg

Lunghezza

5,040–5,640 mm

5,300–5,400 mm

5,298–5,500 mm

Larghezza

1,829–1,872 mm

2,050 mm

1,759–1,900 mm

Altezza

2,469–2,682 mm

2,700–2,780 mm

2,580–2,707 mm

Campo di lavoro

Capacità della benna

0.61–1.2 m³

0.8–1.6 m³

0.8–1.5 m³

Forza di strappo

42–46 kN

44–48 kN

43–55 kN

Altezza di sollevamento

3,120–3,220 mm

2,550 mm

3,217–3,260 mm

Trasmissione

Velocità di marcia

19–35 km/h

20–30 km/h

30 km/h

Mercato

Prezzo di vendita medio · UE

€46k

€33k

€31k

Fascia di prezzo

€33k – €70k

€33k – €34k

€20k – €49k

Annunci attivi

18

3

12

Informazioni su · Caterpillar 906

Panoramica

The Caterpillar 906 is a compact wheel loader in the sub-6-tonne class, combining an operating weight of 5,599 kg with an engine output of 68 hp. Its 0.9 m3 bucket capacity positions it at the productive end of the small wheel loader segment, suited to operators who require genuine material-handling capability without the footprint of a mid-size machine. Built to Cat's established driveline and hydraulic standards, the 906 represents a widely recognised entry point into the Caterpillar wheel loader range.

Applicazioni tipiche

Dove viene utilizzata questa macchina

Compact wheel loaders of this class are regularly deployed in agricultural yards, landscaping operations, municipal works, and light construction sites where maneuverability in confined spaces is a priority. The 0.9 m3 bucket makes the 906 capable of handling aggregates, soil, woodchip, and loose bulk materials at a productive cycle rate. Its power-to-weight ratio also supports pallet fork and sweeper attachment work, broadening its utility across mixed-duty environments.

Ispezione del mercato dell'usato

Cosa controllare prima dell'acquisto

Inspection of a used Caterpillar 906 should begin with a full walk-around for structural cracks at the articulation joint and loader arms, as these areas absorb the greatest cyclic stress in daily loading work. Check hydraulic cylinder seals and hose routing for leaks, and operate the bucket through full curl and lift cycles to confirm smooth, consistent response without cavitation noise. Tyre condition is a significant cost variable on compact wheel loaders, so assess remaining tread depth and sidewall integrity carefully. Request service records to verify filter and fluid change intervals, and confirm that the quick-coupler mechanism, if fitted, locks and releases positively under load. A cold-start inspection is advisable to observe initial oil pressure response and to identify any blue or white exhaust smoke that may indicate internal engine wear.

Mercato attuale

Posizionamento di prezzo

Within the compact wheel loader segment, the Caterpillar 906 is most commonly cross-shopped against the Volvo L30 and the Liebherr L507. The 906 carries a modest weight advantage over both in this class grouping, while its 68 hp engine output and 0.9 m3 bucket sit in the same competitive band. The Liebherr L507 is often noted for its articulation geometry and cab ergonomics, while the Volvo L30 competes on driveline refinement and service network coverage. Within any group of 906 units on the market, the attributes that move a machine through its price band are accumulated operating hours, service history documentation, tyre condition and remaining tread depth, the presence of quick-coupler systems, and the specification of additional attachments such as forks or high-tip buckets. Configuration choices, including cab versus canopy and manual versus ride-control hydraulics, also influence where a given unit sits relative to others of the same model year.

Come analizziamo il mercato →

Resta nella fascia