Prezzo Hitachi ZW250 usato: €37k–€49k in Europa

Quanto costa un Hitachi ZW250 usato in Europa?

Tra i concessionari indipendenti europei, gli annunci di Hitachi ZW250 usati vanno attualmente da € 36.500 a € 49.000, con una media di mercato intorno a € 43.494. Anno, ore di lavoro e configurazione fanno variare il prezzo all'interno di questa fascia. Sulla base di 11 annunci attivi, aggiornati ogni giorno.

Selezione gratuita per acquirenti

Le migliori offerte disponibili per Hitachi ZW250 in Europa.

Confrontiamo prezzo, anno, ore di lavoro e quanto siano adatte alle tue esigenze, poi ti inviamo entro 24 ore una selezione verificata con link diretti al venditore.

Specifiche · Confronto

Come si posiziona lo ZW250 nella sua categoria.

I concorrenti più vicini vengono selezionati automaticamente per categoria e classe di peso. Le specifiche provengono dalle schede tecniche dei produttori; i prezzi provengono dagli annunci recenti dei rivenditori.

Hitachi

ZW250

In sintesi

Classe di peso

20 t

19 t

20 t

Potenza

Motore

Isuzu AH-6HK1X

Scania DC09

Cat C7.1 ACERT

Potenza

194–240 hp

271 hp

250 hp

Dimensioni

Peso operativo

19,585–20,530 kg

19,460 kg

20,225 kg

Lunghezza

8,450–8,520 mm

8,321 mm

7,239 mm

Larghezza

2,830–2,870 mm

2,776 mm

2,819 mm

Altezza

3,400–3,410 mm

3,477 mm

3,200 mm

Campo di lavoro

Capacità della benna

3.4–3.6 m³

3.7 m³

3.3 m³

Forza di strappo

180–190 kN

164 kN

188.9 kN

Altezza di sollevamento

4,200–4,250 mm

4,173 mm

4,242 mm

Trasmissione

Velocità di marcia

34–35 km/h

36.1 km/h

40.1 km/h

Mercato

Prezzo di vendita medio · UE

€43k

—

€94k

Fascia di prezzo

€37k – €49k

— – —

€43k – €140k

Annunci attivi

11

0

9

Informazioni su · Hitachi ZW250

Panoramica

The Hitachi ZW250 is a mid-to-large class wheeled loader with an operating weight of 19,585 kg and an engine output of 240 hp. It is equipped with a standard bucket capacity of 3.4 m³, placing it in a segment suited to high-volume material handling where both payload and cycle efficiency are operational priorities. The machine represents Hitachi's established line of construction and quarry-grade wheeled loaders, built to compete directly with other manufacturers in the 20-tonne class.

Applicazioni tipiche

Dove viene utilizzata questa macchina

Wheeled loaders in the ZW250 class are typically deployed in aggregate handling, quarry face loading, bulk material stockpile management, and large-scale earthmoving support. They are also commonly used in industrial yards, recycling facilities, and port or logistics operations where high bucket capacity and maneuverability are required together. The 3.4 m³ bucket capacity makes the machine well suited to feeding processing plants or loading articulated dump trucks in continuous-cycle environments.

Ispezione del mercato dell'usato

Cosa controllare prima dell'acquisto

When evaluating a ZW250 or any machine in this wheeled loader class, begin with a full inspection of the articulation joint and steering cylinder seals, as these components carry heavy cyclic loads and wear is often visible before it becomes critical. Check the bucket cutting edge, side cutters, and wear plates for remaining material, and assess whether the current bucket is matched to the intended application. Review transmission oil condition and look for contamination indicators, and inspect the axle breathers and final drive seals for evidence of leakage. A documented service history covering engine, hydraulic, and drivetrain intervals is a material factor in assessing reliability risk. Where possible, request a live operating cycle to evaluate hydraulic lift and tilt response under load, and verify that all safety systems and backup alarms are functional before completing any purchase assessment.

Mercato attuale

Posizionamento di prezzo

The ZW250 is cross-shopped most directly against the Caterpillar 962 and the Doosan DL350. All three machines occupy the same approximate weight class and are positioned for similar workloads, but buyers comparing specifications will note that the ZW250's 19,585 kg operating weight and 240 hp engine output are the relevant benchmarks for direct comparison against those competitors, with differences in powertrain configuration, hydraulic responsiveness, cab ergonomics, and dealer support network typically driving purchase decisions between them. Within this class, the attributes that move a specific unit up or down within its price band include recorded service hours, overall mechanical and structural condition, bucket specification and wear-liner status, the presence of quick-coupler or weighing systems, and any documented attachment history. Machines with lower hours, full service records, and factory-approved attachments consistently attract stronger buyer interest than comparable units without that documentation.

Come analizziamo il mercato →

Resta nella fascia