Wheel LoaderEuropa

JCB 403

2,506 kg36 hpMedia di mercato €29k · 3 annunci · 1 sotto il prezzo di mercato

Vista lateraleJCB 403
JCB 403 side elevation
Peso operativo
2,506 kg
Lunghezza
4,175 mm
Fig · proporzionale alla scheda tecnica · pala gommata
Mercato in diretta

3 prezzi richiesti attivi in tutta Europa

Media di mercato€29k

I prezzi di vendita si attestano tra €24k e €35k, circa 42% sotto la media di mercato.

NL
€107k
DK
€91k
PL
€51k
BE
€48k
DE
€42k
  • 2017NL · nome del rivenditore nascosto€20k
In base a 3 annunci di rivenditori analizzati di recente.Aggiornato al 16 Sept 2026

Questo modello si colloca 48% sotto alla media di categoria su 114 modelli comparabili.

Quanto costa un JCB 403 usato in Europa?

Tra i concessionari indipendenti europei, gli annunci di JCB 403 usati vanno attualmente da € 23.650 a € 34.540, con una media di mercato intorno a € 29.050. Anno, ore di lavoro e configurazione fanno variare il prezzo all'interno di questa fascia. Sulla base di 3 annunci attivi, aggiornati ogni giorno.

Invio privato

Inviami via e-mail il JCB 403 a prezzo ridotto di questa settimana.

1 annuncio sotto il prezzo di mercato in questo momento. Ti rispondiamo entro 15 minuti con i risultati più pertinenti alle tue specifiche.

MarcaJCB
Modello403
Specifiche · Confronto

Come si posiziona lo 403 nella sua categoria.

I concorrenti più vicini vengono selezionati automaticamente per categoria e classe di peso. Le specifiche provengono dalle schede tecniche dei produttori; i prezzi provengono dagli annunci recenti dei rivenditori.

In sintesi
Classe di peso
2.5 t
3 t
2 t
Potenza
Motore
Kubota V1505
Yanmar 3TNV80FT
Yanmar 3TNV80F (1331 cm3, Stage V)
Potenza
36 hp
25–54.5 hp
25 hp
Dimensioni
Peso operativo
2,506 kg
2,900–3,100 kg
1,950 kg
Lunghezza
4,175 mm
4,420–4,581 mm
4,050 mm
Larghezza
1,411 mm
1,040 mm
1,240 mm
Altezza
2,201 mm
2,300–2,400 mm
2,170 mm
Campo di lavoro
Capacità della benna
0.3 m³
0.4 m³
0.35 m³
Forza di strappo
16 kN
11.6 kN
Altezza di sollevamento
2,884 mm
2,690–2,880 mm
2,680 mm
Trasmissione
Velocità di marcia
30 km/h
20–30 km/h
20 km/h
Mercato
Prezzo di vendita medio · UE
€29k
€76k
€34k
Fascia di prezzo
€24k€35k
€76k€76k
€28k€42k
Annunci attivi
3
1
3
Specifiche · schede tecniche del produttorePrezzi · annunci recenti dei rivenditori, finestra scorrevole
Informazioni su · JCB 403

Panoramica

The JCB 403 is a compact wheel loader in the sub-3-tonne class, with an operating weight of 2506 kg and an engine output of 36 hp. It is equipped with a 0.3 m3 bucket and is designed for tight-site material handling where a full-size wheel loader would be impractical. As a JCB product it carries the brand recognition and dealer network typical of a mainstream European OEM in this segment.

Applicazioni tipiche

Dove viene utilizzata questa macchina

Compact wheel loaders in this weight class are routinely deployed on agricultural holdings, equestrian centres, small construction sites, and municipal maintenance operations. Their combination of manoeuvrability and lifting capacity makes them suited to stockpile management, yard cleaning, and loading tasks where site access or floor-loading restrictions limit larger machines. The 0.3 m3 bucket capacity is well matched to bulk materials such as woodchip, sand, manure, and gravel in volumes typical of small-to-medium daily operations.

Ispezione del mercato dell'usato

Cosa controllare prima dell'acquisto

When inspecting a compact wheel loader of this type, begin with the loader arms and pivot points, checking for play in the pins and bushings and for any signs of weld repair or cracking in high-stress areas. Inspect the bucket cutting edge and side plates for wear, as replacement frequency reflects actual working intensity. Check hydraulic hoses and cylinder seals for weeping, particularly at the tilt and lift rams. On the drivetrain, assess axle breather condition and listen for transmission noise under load. Tyre condition is a meaningful cost indicator at purchase, so assess tread depth and sidewall integrity on all four wheels. Confirm that any quick-coupler mechanism engages and releases correctly and that safety locks function as intended. Request service records to verify oil and filter change intervals, and confirm that the cooling system is clean and free of contamination, which is especially relevant on machines used in dusty or organic-material environments.

Mercato attuale

Posizionamento di prezzo

In the sub-3-tonne compact wheel loader segment, the JCB 403 is most directly cross-shopped against the Weidemann 1390 and the Kramer 5035. The Weidemann 1390 is a specialist compact loader with a strong following in livestock and stable environments, often perceived as purpose-built for agricultural interiors. The Kramer 5035 occupies a similar power and weight bracket and competes on versatility and attachment compatibility. The JCB 403 differentiates itself through the broader JCB parts and service infrastructure and the brand familiarity that supports residual confidence in mixed-fleet operations. Within this class, the attributes that move a machine along the value spectrum include recorded service hours, the presence and condition of a quick-coupler system, the number and type of hydraulic circuits, tyre wear and specification, and whether a bucket or wider attachment package accompanies the sale. Overall condition, provenance documentation, and cab configuration further influence where any individual unit sits relative to others of the same model.

Resta nella fascia

Altri modelli JCB che seguiamo

Il prezzo di vendita medio è mostrato come delta rispetto alla media della classe (€29k).

Il nostro team

Trova un JCB 403.

Il nostro team analizza il mercato europeo e invia da tre a sette opzioni reali per un JCB 403. La nostra scelta, e perché. Gratis finché siamo nuovi.

Avvia una richiesta