Prezzo Manitou MRT2150 usato: €44k–€109k in Europa

Quanto costa un Manitou MRT2150 usato in Europa?

Tra i concessionari indipendenti europei, gli annunci di Manitou MRT2150 usati vanno attualmente da € 44.000 a € 108.700, con una media di mercato intorno a € 68.430. Anno, ore di lavoro e configurazione fanno variare il prezzo all'interno di questa fascia. Sulla base di 12 annunci attivi, aggiornati ogni giorno.

Selezione gratuita per acquirenti

Le migliori offerte disponibili per Manitou MRT2150 in Europa.

Confrontiamo prezzo, anno, ore di lavoro e quanto siano adatte alle tue esigenze, poi ti inviamo entro 24 ore una selezione verificata con link diretti al venditore.

Specifiche · Confronto

Come si posiziona lo MRT2150 nella sua categoria.

I concorrenti più vicini vengono selezionati automaticamente per categoria e classe di peso. Le specifiche provengono dalle schede tecniche dei produttori; i prezzi provengono dagli annunci recenti dei rivenditori.

Manitou

MRT2150

In sintesi

Classe di peso

—

Potenza

Motore

—

Potenza

—

Dimensioni

Peso operativo

—

Lunghezza

—

Larghezza

—

Altezza

—

Campo di lavoro

Capacità massima di sollevamento

—

Altezza massima di sollevamento

—

Sbraccio massimo

—

Portata allo sbraccio massimo

—

Trasmissione

Velocità di marcia

—

Mercato

Prezzo di vendita medio · UE

€68k

Fascia di prezzo

€44k – €109k

Annunci attivi

12

Informazioni su · Manitou MRT2150

Panoramica

The Manitou MRT2150 is a rotating telehandler, a machine class that combines the reach and lift capacity of a conventional telescopic handler with a 360-degree slewing superstructure, allowing work across a full circle without repositioning the carrier. It sits at the upper end of the rough-terrain rotating telehandler segment, designed for demanding lifting operations where a static telehandler or crane would be less flexible. The MRT designation identifies it as part of Manitou's rotating handler lineup, differentiated from the non-rotating MT series by its slewing capability and typically higher lift height and capacity ratings.

Applicazioni tipiche

Dove viene utilizzata questa macchina

Rotating telehandlers in this class are well suited to construction sites, industrial installations, and infrastructure projects where materials or loads must be placed precisely at height and across a wide horizontal arc. They are regularly deployed for steel erection, facade work, precast concrete placement, and wind-energy installation support where continuous repositioning of a conventional machine would create unacceptable downtime. The MRT2150 class also finds use in rental fleets serving civil engineering contractors who require a machine that can substitute for a small mobile crane on confined sites.

Ispezione del mercato dell'usato

Cosa controllare prima dell'acquisto

Inspection of a used rotating telehandler should begin with the slewing ring and its bearing surfaces, as wear or play in this assembly is both a safety concern and a significant repair item. The telescopic boom sections should be examined for straightness, wear-pad condition, and any signs of cracking or weld repair, particularly around the pivot points and the knuckle where rotation occurs. Hydraulic cylinder seals, hose routing, and the condition of the outrigger pads and their locking mechanisms warrant close attention, since hydraulic leaks and outrigger defects can ground the machine immediately. Confirm that the load management indicator and safety interlock systems are fully operational, as regulatory compliance depends on them. Request a full service history and check that scheduled maintenance intervals have been observed. Where attachments are included, verify that they are rated and documented for use with this specific machine, as mismatched attachments affect both safety and insurability.

Mercato attuale

Posizionamento di prezzo

The MRT2150 competes in the upper rotating telehandler segment alongside machines such as the JLG 4017RS, the Merlo Roto series, and the Liebherr TL432-13. Against non-rotating high-reach telehandlers it offers the slewing advantage but typically carries a higher acquisition and operating cost profile as a trade-off. Within the used market for this specific model, the attributes that move a machine within its price band are accumulated working hours, service history documentation, the presence and condition of attachments such as jibs, forks, and winches, whether the machine carries a current inspection certificate, and overall structural and hydraulic condition. Configuration details, including whether a machine is fitted with outriggers, fly-jib extensions, or a hook block, materially affect its utility and therefore its comparative market position. Machines with lower hours, full service records, and a verified attachment set consistently occupy the stronger end of the value range, while high-hour units with incomplete documentation or worn wear parts sit at the lower end regardless of cosmetic appearance.

Come analizziamo il mercato →

Resta nella fascia