20,700 kg272 hpMedia di mercato €54k · 14 annunci · 10 sotto il prezzo di mercato
I prezzi di vendita si attestano tra €44k e €60k, circa 7% sopra la media di mercato.
Tra i concessionari indipendenti europei, gli annunci di Volvo L120 usati vanno attualmente da € 43.910 a € 60.220, con una media di mercato intorno a € 53.535. Anno, ore di lavoro e configurazione fanno variare il prezzo all'interno di questa fascia. Sulla base di 14 annunci attivi, aggiornati ogni giorno.
10 annunci sotto il prezzo di mercato in questo momento. Ti rispondiamo entro 15 minuti con i risultati più pertinenti alle tue specifiche.
Ogni riga è un passaggio che il nostro team compie quando chiedi un modello. I numeri vengono dal mercato europeo in tempo reale: ciò che abbiamo letto questa settimana, ciò che segnaleremmo, e ciò che invieremmo se lo chiedessi.
I concorrenti più vicini vengono selezionati automaticamente per categoria e classe di peso. Le specifiche provengono dalle schede tecniche dei produttori; i prezzi provengono dagli annunci recenti dei rivenditori.
The Volvo L120 is a large articulated wheel loader in the 20-tonne operating class, producing 272 hp and carrying a standard bucket capacity of 3.7 m³. It has been in continuous production since 1991, a production run that reflects broad market acceptance across multiple generations of the design. The machine sits at the upper end of the mid-large loader segment, positioned for high-volume material handling where both payload capacity and cycle efficiency are priorities.
The L120 is well suited to bulk material handling in quarrying, aggregates, and construction earthworks, where its bucket volume and operating weight provide effective productivity in load-and-carry and face-loading cycles. It is also a common choice for port and terminal operations, waste and recycling facilities, and large infrastructure projects requiring continuous stockpile management. The power-to-weight ratio makes it capable across a range of underfoot conditions typically encountered in these environments.
Inspection of a used L120 should prioritise the condition of the articulation joint and its bearings, as this is a high-wear point common to all articulated loaders of this class. The boom arms, lift cylinders, and tilt linkage should be checked for cracks, wear, and seal integrity. The transmission and axles warrant particular attention given the duty cycles typical of this machine size. Buyers should request full service history and verify filter and oil change intervals have been maintained. Cab condition, visibility aids, and the state of the quick-coupler system if fitted are relevant to both operator productivity and residual value. Tyre wear and condition represent a significant factor in assessing overall machine value, and all hydraulic circuits should be pressure-tested rather than inspected visually alone.
The L120 competes directly with the Caterpillar 962 and the JCB 457, all three machines occupying the same broad operating-weight and productivity class. Against the Caterpillar 962, the L120 is frequently evaluated on differences in drivetrain architecture, cab ergonomics, and dealer support network density in a given region. Against the JCB 457, buyers typically compare lift geometry, bucket fill characteristics, and total cost of ownership profiles. Within the L120 segment itself, the attributes that move a specific machine within its price band are accumulated service hours, configuration choices such as high-tip or rehandling bucket fitment, the presence of quick-coupler systems and additional attachments, overall mechanical condition, service history documentation, and whether the machine carries current safety certifications. Newer production years command a premium over earlier generations of the same model line.
Il prezzo di vendita medio è mostrato come delta rispetto alla media della classe (€54k).
Il nostro team analizza il mercato europeo e invia da tre a sette opzioni reali per un Volvo L120. La nostra scelta, e perché. Gratis finché siamo nuovi.
Avvia una richiesta