Gebrauchte Caterpillar 906: 18 Live-Inserate, €33k–€70k

Wie viel kostet ein gebrauchter Caterpillar 906 in Europa?

Bei unabhängigen europäischen Händlern liegen gebrauchte Caterpillar 906 derzeit zwischen 33.480 € und 69.950 €, der Marktdurchschnitt bei etwa 47.007 €. Baujahr, Betriebsstunden und Ausstattung bewegen den Preis innerhalb dieser Spanne. Basierend auf 18 aktiven Inseraten, täglich aktualisiert.

Privater Versand

Schicken Sie mir diese Woche den günstig bepreisten Caterpillar 906 per E-Mail.

12 Inserate unter Marktwert jetzt. Wir melden uns innerhalb von 15 Minuten mit den besten Übereinstimmungen für Ihre Anforderungen zurück.

Spezifikation · Vergleich

Wie der 906 in seiner Klasse abschneidet.

Die nächstgelegenen Wettbewerber werden automatisch nach Kategorie und Gewichtsklasse ausgewählt. Technische Daten aus Herstellerdatenblättern; Preise aus aktuellen Händerinseraten.

Caterpillar

906

Auf einen Blick

Gewichtsklasse

6 t

5 t

Leistung

Motor

Cat C3.3B / C3.4

Liebherr D 504

Volvo D3.3J / Deutz BF4L 1011FT (early)

Leistung

68–70 hp

60–68 hp

58–75 hp

Abmessungen

Betriebsgewicht

4,950–5,640 kg

5,240–5,835 kg

4,761–5,500 kg

Länge

5,040–5,640 mm

5,300–5,400 mm

5,298–5,500 mm

Breite

1,829–1,872 mm

2,050 mm

1,759–1,900 mm

Höhe

2,469–2,682 mm

2,700–2,780 mm

2,580–2,707 mm

Arbeitsbereich

Löffelinhalt

0.61–1.2 m³

0.8–1.6 m³

0.8–1.5 m³

Ausbrechkraft

42–46 kN

44–48 kN

43–55 kN

Hubhöhe

3,120–3,220 mm

2,550 mm

3,217–3,260 mm

Antrieb

Fahrgeschwindigkeit

19–35 km/h

20–30 km/h

30 km/h

Markt

Durchschnittlicher Angebotspreis · EU

€47k

€33k

€31k

Preisspanne

€33k – €70k

€33k – €34k

€20k – €49k

Aktive Inserate

18

3

12

Über · Caterpillar 906

Übersicht

The Caterpillar 906 is a compact wheel loader in the sub-6-tonne class, combining an operating weight of 5,599 kg with an engine output of 68 hp. Its 0.9 m3 bucket capacity positions it at the productive end of the small wheel loader segment, suited to operators who require genuine material-handling capability without the footprint of a mid-size machine. Built to Cat's established driveline and hydraulic standards, the 906 represents a widely recognised entry point into the Caterpillar wheel loader range.

Typische Anwendungsbereiche

Wo diese Maschine eingesetzt wird

Compact wheel loaders of this class are regularly deployed in agricultural yards, landscaping operations, municipal works, and light construction sites where maneuverability in confined spaces is a priority. The 0.9 m3 bucket makes the 906 capable of handling aggregates, soil, woodchip, and loose bulk materials at a productive cycle rate. Its power-to-weight ratio also supports pallet fork and sweeper attachment work, broadening its utility across mixed-duty environments.

Gebrauchtmarkt-Inspektion

Was Sie vor dem Kauf beachten sollten

Inspection of a used Caterpillar 906 should begin with a full walk-around for structural cracks at the articulation joint and loader arms, as these areas absorb the greatest cyclic stress in daily loading work. Check hydraulic cylinder seals and hose routing for leaks, and operate the bucket through full curl and lift cycles to confirm smooth, consistent response without cavitation noise. Tyre condition is a significant cost variable on compact wheel loaders, so assess remaining tread depth and sidewall integrity carefully. Request service records to verify filter and fluid change intervals, and confirm that the quick-coupler mechanism, if fitted, locks and releases positively under load. A cold-start inspection is advisable to observe initial oil pressure response and to identify any blue or white exhaust smoke that may indicate internal engine wear.

Aktueller Markt

Preisposition

Within the compact wheel loader segment, the Caterpillar 906 is most commonly cross-shopped against the Volvo L30 and the Liebherr L507. The 906 carries a modest weight advantage over both in this class grouping, while its 68 hp engine output and 0.9 m3 bucket sit in the same competitive band. The Liebherr L507 is often noted for its articulation geometry and cab ergonomics, while the Volvo L30 competes on driveline refinement and service network coverage. Within any group of 906 units on the market, the attributes that move a machine through its price band are accumulated operating hours, service history documentation, tyre condition and remaining tread depth, the presence of quick-coupler systems, and the specification of additional attachments such as forks or high-tip buckets. Configuration choices, including cab versus canopy and manual versus ride-control hydraulics, also influence where a given unit sits relative to others of the same model year.

Wie wir den Markt einschätzen →

Im Bereich bleiben