Gebrauchte Kubota U50: Preis €32k–€48k in Europa

Wie viel kostet ein gebrauchter Kubota U50 in Europa?

Bei unabhängigen europäischen Händlern liegen gebrauchte Kubota U50 derzeit zwischen 32.350 € und 48.000 €, der Marktdurchschnitt bei etwa 40.723 €. Baujahr, Betriebsstunden und Ausstattung bewegen den Preis innerhalb dieser Spanne. Basierend auf 60 aktiven Inseraten, täglich aktualisiert.

Kostenlose Auswahl für Käufer

Die besten verfügbaren Angebote für Kubota U50 in Europa.

Wir vergleichen Preis, Baujahr, Betriebsstunden und Eignung und senden Ihnen innerhalb von 24 Stunden eine geprüfte Shortlist mit direkten Links zum Verkäufer.

Spezifikation · Vergleich

Wie der U50 in seiner Klasse abschneidet.

Die nächstgelegenen Wettbewerber werden automatisch nach Kategorie und Gewichtsklasse ausgewählt. Technische Daten aus Herstellerdatenblättern; Preise aus aktuellen Händerinseraten.

Kubota

U50

Auf einen Blick

Gewichtsklasse

5 t

Leistung

Motor

Kubota D1803-CR-T-E5

Yanmar 4TNV88

Yanmar 4TNV88-XYB

Leistung

40 hp

36–40 hp

40–41 hp

Abmessungen

Betriebsgewicht

4,775 kg

4,730–5,320 kg

4,665–4,950 kg

Länge

—

5,460–5,523 mm

5,235–5,240 mm

Breite

1,960 mm

1,960–2,002 mm

1,560–1,962 mm

Höhe

2,550 mm

2,512–2,560 mm

2,591–2,620 mm

Transportlänge

—

5,464 mm

5,235–5,240 mm

Arbeitsbereich

Löffelinhalt

0.13 m³

0.13–0.21 m³

0.23 m³

Max. Grabtiefe

3,370 mm

3,570–3,870 mm

3,582–3,590 mm

Max. Reichweite

5,850 mm

5,970–6,280 mm

5,740–5,752 mm

Heckschwenkradius

—

1,000–1,003 mm

981 mm

Antrieb

Fahrgeschwindigkeit

4.8 km/h

4.3–4.5 km/h

4.6–4.7 km/h

Markt

Durchschnittlicher Angebotspreis · EU

€41k

€23k

—

Preisspanne

€32k – €48k

€20k – €25k

— – —

Aktive Inserate

60

2

0

Über · Kubota U50

Übersicht

The Kubota U50 is a conventional-tail-swing mini-excavator in the 5-tonne class, combining an operating weight of 4775 kg with a 40 hp engine and a 0.13 m3 bucket capacity. It occupies the upper tier of the compact excavator segment, where machines deliver meaningfully more reach and breakout force than sub-3-tonne units while still fitting within site-access and transport constraints typical of urban and suburban work. The U50 is a recognised platform from Kubota's core excavator range and represents a well-established size class in the used-equipment market.

Typische Anwendungsbereiche

Wo diese Maschine eingesetzt wird

Mini-excavators in the 5-tonne class are routinely deployed on utility trenching, drainage installation, landscaping groundworks, and foundation excavation for small structures. Their weight and digging envelope suit confined urban sites, pipeline repair corridors, and agricultural drainage work where larger machines cannot operate efficiently. The 0.13 m3 bucket capacity is well matched to finish grading, trench profiling, and loading into compact dumpers or trucks.

Gebrauchtmarkt-Inspektion

Was Sie vor dem Kauf beachten sollten

When inspecting a used 5-tonne mini-excavator of this type, prioritise a full review of the service history and hour-meter consistency. Examine the undercarriage carefully: track pad wear, roller condition, and final-drive integrity are primary cost drivers in this class and are not immediately visible without hands-on inspection. Check the slew ring for play and noise under load. Inspect all hydraulic lines, cylinders, and seals for weeping or deterioration, and test auxiliary hydraulic circuits if present. Review the boom, dipper, and bucket pins and bushings for wear. Confirm that any quick-coupler or fitted attachments are compatible and in serviceable condition. A pre-purchase inspection by an independent engineer is advisable, particularly for machines where service documentation is incomplete.

Aktueller Markt

Preisposition

Within the 5-tonne mini-excavator class the Kubota U50 is most directly cross-shopped against the New Holland E50 and the Hitachi ZX50U. All three machines compete in the same weight and power band, so buyers typically evaluate them on build reputation, parts-network coverage, and available configuration rather than raw output figures alone. The Kubota U50's conventional tail-swing geometry distinguishes it in practical terms from zero- or reduced-tail-swing variants in this class, affecting suitability for tight-boundary work. Within this segment, position in the price band is primarily driven by recorded operating hours, overall mechanical and structural condition, the presence of a quick-coupler or auxiliary hydraulics, bucket and attachment inventory, cab specification including climate control, and provenance of service history. Machines with documented maintenance records and low accumulation of hours consistently attract stronger buyer interest regardless of model.

Wie wir den Markt einschätzen →

Im Bereich bleiben