Über · Volvo EW160Übersicht
The Volvo EW160 is a mid-range wheeled excavator rated at an operating weight of 17,200 kg and 150 hp engine output, positioning it firmly in the 15-to-18-tonne road-mobile excavator class. Standard bucket capacity is 0.78 m³, suited to general earthworks at a scale that justifies rubber-tyred mobility over tracked alternatives. As a wheeled machine, it is designed for frequent repositioning between sites and for working on paved or sensitive surfaces without the ground-damage characteristics of tracked undercarriages. Volvo's EW series carries a broad international service network, making spares and technical support accessible across most major construction markets.
Typische AnwendungsbereicheWo diese Maschine eingesetzt wird
Wheeled excavators in this weight class are routinely deployed on utility installation, road and drainage construction, municipal earthworks, and light demolition where on-road travel between work faces is a daily requirement. The 17,200 kg operating weight gives the EW160 the reach and breakout force to handle trench excavation, pipe-laying support, and material handling with a variety of hydraulic attachments including grapples, compactors, and hydraulic breakers. Its road-legal configuration also makes it a practical choice for contractors who need a single machine to travel under its own power between urban job sites without a low-loader movement each time.
Gebrauchtmarkt-InspektionWas Sie vor dem Kauf beachten sollten
Inspection of a used wheeled excavator in this class should prioritise the condition of the tyres and wheel hubs, as uneven wear or cracking signals prolonged hard-surface use or alignment issues. The slewing ring and slewing gear should be checked for play and abnormal noise under load, and all hydraulic cylinders should be inspected for seal weepage and rod scoring. Service history documentation is particularly important on Volvo machinery because it allows verification of filter and fluid change intervals and flags any major component replacements. Buyers should operate the machine through full boom, arm, and bucket cycles to confirm smooth, uninterrupted hydraulic response, and should test all ancillary circuits if a quick-coupler or additional hydraulic line is fitted. Cab condition, including HVAC function and visibility aids, directly affects operator productivity and should not be treated as a cosmetic issue. Any machine presented without a verifiable service record warrants an independent pre-purchase inspection before commitment.
Aktueller MarktPreisposition
Within the 15-to-18-tonne wheeled excavator segment, the EW160 is most directly cross-shopped against the Hyundai Robex180W and the Hyundai HW160. The Robex180W sits slightly above the EW160 on operating weight, offering marginally greater digging mass, while the HW160 is a closer weight-class match at the lower end of the Hyundai wheeled range. The Volvo is differentiated by its published 150 hp output and 0.78 m³ bucket rating, which buyers should verify against the Hyundai equivalents when comparing cycle times and productivity in comparable soils. Within any given segment, value positioning is driven primarily by accumulated service hours, which affect remaining undercarriage and hydraulic life; machine configuration, including blade fitment, outrigger type, and cab specification; attachment inventory, since a well-documented quick-coupler and attachment package adds immediate utility; and overall condition of tyres, slewing ring, and hydraulic circuit, all of which are costly to rectify post-purchase.
