Acerca de · Fuchs MHL350Resumen
The Fuchs MHL350 is a heavy-duty rail- or stationary-mounted material handler in the upper-mid segment of the dedicated material-handling excavator class, designed for high-throughput bulk and scrap processing duties. It operates at a working weight of 35,486 kg and is powered by a 215 hp engine, placing it firmly in the large-frame handler category suited to industrial and port environments. The standard bucket capacity of 0.6 m³ is configured for use with purpose-built handling attachments rather than earthmoving buckets, reflecting the machine's role as a specialist handler rather than a general-purpose excavator.
Aplicaciones típicasDónde se utiliza esta máquina
The MHL350 is used predominantly in scrap yards, steel mills, recycling facilities, timber yards, and bulk cargo ports, where its elevated cab position and high-reach boom geometry allow operators to load shredders, sort material, or feed processing lines continuously. Secondary applications include waste transfer stations and aggregate terminals that require sustained duty cycles and precise material placement. The machine class is built for repetitive, high-cycle operation with hydraulic grapples, orange-peel grabs, or clamshell attachments rather than bucket work.
Inspección del mercado de segunda manoQué hay que comprobar antes de comprar
Inspection of a used MHL350 should prioritize the condition of the slewing ring and its gear teeth, as this component sustains high cyclical loads in continuous material-handling duty and is costly to replace. The hydraulic system, including pump output, valve response, and circuit integrity, warrants independent assessment given the high operating pressure demands of grapple attachments. Buyers should verify the condition of the elevated cab mechanism, including its lift cylinders and locking systems, and review boom and stick pin wear across all pivot points. Engine hours should be correlated against service records, and the electrical system should be checked for compatibility with any site-specific control integrations. Where the machine has operated in corrosive environments such as ports or recycling facilities, structural inspection of the undercarriage frame and counterweight mounting points is advisable before purchase.
Mercado actualPosición de precios
Within the large material-handler class, the Fuchs MHL350 is most directly cross-shopped against the Sennebogen 830 and Sennebogen 825. The Sennebogen 830 is a close competitor by operating weight and power output and is often preferred by buyers with established Sennebogen service networks, while the Sennebogen 825 sits slightly below the MHL350 in the weight and power hierarchy, making the Fuchs unit the heavier and more powerful option in that comparison. Buyers evaluating these machines on the used market should expect the price band to be influenced by accumulated operating hours, the presence and condition of purpose-built attachments such as grapples or grabs, undercarriage or rail-gear condition, cab specification including elevation height, and overall hydraulic system health. Machines with lower hours, full attachment sets, and documented service histories command stronger positioning within the band, while high-hour units or those with missing attachments trade toward the lower end regardless of make.
