19,585 kg240 hpMedia del mercado €43k · 11 anuncios · 6 por debajo del mercado
Los precios de venta se sitúan entre €37k y €49k, alrededor de un 13% por debajo de la media del mercado.
Entre los concesionarios independientes europeos, los anuncios de Hitachi ZW250 de segunda mano oscilan actualmente entre 36.500 € y 49.000 €, con una media de mercado en torno a 43.494 €. El año, las horas de trabajo y la configuración mueven el precio dentro de ese rango. Basado en 11 anuncios activos, actualizados a diario.
Comparamos el precio, el año, las horas de trabajo y la adecuación a tus necesidades. Después te enviamos en 24 horas una selección revisada con enlaces directos al vendedor.
Cada fila es un paso que sigue nuestro equipo cuando pides un modelo. Los números vienen del mercado europeo en directo: lo que leímos esta semana, lo que marcaríamos, y lo que te enviaríamos si nos lo pidieras.
Los competidores más cercanos se seleccionan automáticamente por categoría y clase de peso. Especificaciones de las hojas de datos del fabricante; precios de los anuncios recientes de los concesionarios.
The Hitachi ZW250 is a mid-to-large class wheeled loader with an operating weight of 19,585 kg and an engine output of 240 hp. It is equipped with a standard bucket capacity of 3.4 m³, placing it in a segment suited to high-volume material handling where both payload and cycle efficiency are operational priorities. The machine represents Hitachi's established line of construction and quarry-grade wheeled loaders, built to compete directly with other manufacturers in the 20-tonne class.
Wheeled loaders in the ZW250 class are typically deployed in aggregate handling, quarry face loading, bulk material stockpile management, and large-scale earthmoving support. They are also commonly used in industrial yards, recycling facilities, and port or logistics operations where high bucket capacity and maneuverability are required together. The 3.4 m³ bucket capacity makes the machine well suited to feeding processing plants or loading articulated dump trucks in continuous-cycle environments.
When evaluating a ZW250 or any machine in this wheeled loader class, begin with a full inspection of the articulation joint and steering cylinder seals, as these components carry heavy cyclic loads and wear is often visible before it becomes critical. Check the bucket cutting edge, side cutters, and wear plates for remaining material, and assess whether the current bucket is matched to the intended application. Review transmission oil condition and look for contamination indicators, and inspect the axle breathers and final drive seals for evidence of leakage. A documented service history covering engine, hydraulic, and drivetrain intervals is a material factor in assessing reliability risk. Where possible, request a live operating cycle to evaluate hydraulic lift and tilt response under load, and verify that all safety systems and backup alarms are functional before completing any purchase assessment.
The ZW250 is cross-shopped most directly against the Caterpillar 962 and the Doosan DL350. All three machines occupy the same approximate weight class and are positioned for similar workloads, but buyers comparing specifications will note that the ZW250's 19,585 kg operating weight and 240 hp engine output are the relevant benchmarks for direct comparison against those competitors, with differences in powertrain configuration, hydraulic responsiveness, cab ergonomics, and dealer support network typically driving purchase decisions between them. Within this class, the attributes that move a specific unit up or down within its price band include recorded service hours, overall mechanical and structural condition, bucket specification and wear-liner status, the presence of quick-coupler or weighing systems, and any documented attachment history. Machines with lower hours, full service records, and factory-approved attachments consistently attract stronger buyer interest than comparable units without that documentation.
El precio de venta medio se muestra como delta respecto a la media de la clase (€43k).
Nuestro equipo analiza el mercado europeo y envía de tres a siete opciones reales para un Hitachi ZW250. Nuestra elección, y por qué. Gratis mientras seamos nuevos.
Iniciar una solicitud