Articulated Dump TruckEurope

Bell B30E

20,140 kg329 hpMoyenne du marché €119k · 3 annonces · 2 sous le prix du marché

Vue de côtéBell B30E
Bell B30E side elevation
Poids en ordre de marche
20,140 kg
Longueur
9,190 mm
Fig · proportionnel à la fiche technique · tombereau articulé
Marché en direct

3 prix demandés actifs en Europe

Moyenne du marché€119k

Les prix de vente se situent entre €82k et €148k, environ 49% au-dessus de la moyenne du marché.

NL
€94k
DK
€60k
PL
€83k
BE
€62k
CZ
€49k
  • 201710,825 hrs · NL · nom du concessionnaire masqué€80k
  • 20188,674 hrs · NL · nom du concessionnaire masqué€86k
Basé sur 3 annonces de concessionnaires récemment consultées.Au 14 Sept 2026

Ce modèle se situe 59% au-dessus de de la moyenne de classe sur 30 modèles comparables.

Combien coûte un Bell B30E d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de Bell B30E d'occasion vont actuellement de 82 100 € à 148 400 €, la moyenne du marché se situant autour de 118 500 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 3 annonces actives, mises à jour quotidiennement.

Envoi privé

Envoyez-moi par e-mail le Bell B30E sous-évalué de cette semaine.

2 annonces sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

MarqueBell
ModèleB30E
Spécifications · Comparaison

Comment le B30E se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

En un coup d'œil
Classe de poids
28 t
24 t
25 t
Puissance
Moteur
Mercedes-Benz OM926 LA
Volvo D10B ACE2
Cummins QSC 8.3
Puissance
316–329 hp
305–314 hp
266 hp
Couple maximal
1,300 Nm
1,700 Nm
1,230 Nm
Dimensions
Poids en ordre de marche
19,960–20,140 kg
18,800–19,470 kg
20,878 kg
Longueur
9,190 mm
9,939 mm
9,800 mm
Largeur
3,270 mm
3,130 mm
3,000 mm
Hauteur
3,420 mm
3,470 mm
3,500 mm
Plage de travail
Charge utile
28,000 kg
22,500–24,000 kg
23,000 kg
Capacité de la caisse (comble)
17.5–21 m³
13–13.5 m³
13.5 m³
Transmission
Vitesse maximale
50 km/h
53 km/h
52 km/h
Rayon de braquage
7,900–8,000 mm
7,090–8,400 mm
Marché
Prix demandé moyen · UE
€119k
€59k
Fourchette de prix
€82k€148k
€48k€71k
Annonces actives
3
1
0
Spécifications · fiches techniques du fabricantPrix · annonces récentes des concessionnaires, fenêtre glissante
À propos · Bell B30E

Aperçu

The Bell B30E is a 30-tonne class articulated dump truck with an operating weight of 20,140 kg and an engine output of 329 hp. It sits in the mid-range segment of the articulated hauler market, positioned above 25-tonne class machines and offering a high power-to-payload ratio for demanding earthmoving cycles. Bell Equipment designs the B30E around a six-wheel-drive driveline and an articulated steering joint, giving it the traction and maneuverability characteristic of the ADT class.

Applications typiques

Lieu d'utilisation de cette machine

Articulated dump trucks in the 30-tonne class are the workhorses of large earthworks, quarrying, road construction, and infrastructure development where soft or broken ground conditions make rigid haulers impractical. The B30E is suited to cut-and-fill operations, dam and embankment construction, and high-cycle aggregate haulage where consistent payload capacity and off-road mobility are priorities. Its weight and power class also make it a common choice for mining support operations and large-scale site-preparation contracts.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

Inspection of any used articulated dump truck in this class should begin with the articulation joint and oscillation ring, as wear in these components is both common and consequential. The driveline, including differentials and the transfer case, warrants close attention given the high-torque demands of loaded off-road cycles. Buyers should verify tyre condition across all six positions, since tyre replacement on a machine of this operating weight represents a significant cost commitment. Body and liner wear is a reliable indicator of the work environment and loading practices the unit has experienced. An independent pre-purchase inspection should include a full fluid analysis to assess engine, transmission, and axle health, and service records should be cross-checked against hour-meter readings to confirm maintenance intervals were observed. Confirm that all electronic systems, including any on-board weighing or telemetry equipment, are functional before purchase.

Marché actuel

Position tarifaire

In the 30-tonne articulated hauler segment, the Bell B30E is cross-shopped most directly against the Volvo A25D and the Terex TA25. Both the Volvo A25D and the Terex TA25 are 25-tonne class machines, meaning the B30E carries a higher rated payload and offers 329 hp against a lighter competitive specification, which positions it as a step up in capacity for buyers whose cycle volumes justify the larger machine. Within the B30E's own price band, the primary attributes that drive spread are recorded operating hours, overall mechanical condition, tyre life remaining, body wear and liner condition, and whether the unit is equipped with options such as a tailgate, upgraded suspension, or an on-board weighing system. Service history documentation and the availability of full maintenance records also influence where a specific unit sits relative to others of the same model year.

Notre équipe

Trouvez-moi un Bell B30E.

Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Bell B30E. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.

Lancer une demande