CompactorEurope

Bomag BW80

1,550 kg20 hpMoyenne du marché €12k · 3 annonces · 2 sous le prix du marché

Vue de côtéBomag BW80
Bomag BW80 side elevation
Poids en ordre de marche
1,550 kg
Longueur
1,860 mm
Fig · proportionnel à la fiche technique · compacteur
Marché en direct

3 prix demandés actifs en Europe

Moyenne du marché€12k

Les prix de vente se situent entre €8k et €16k, environ 45% en dessous de la moyenne du marché.

NL
€44k
CZ
€49k
BG
€26k
PL
€16k
BE
€13k
  • 2008GB · nom du concessionnaire masqué€7k
  • 2010835 hrs · GB · nom du concessionnaire masqué€8k
Basé sur 3 annonces de concessionnaires récemment consultées.Au 15 Sept 2026

Ce modèle se situe 53% en dessous de de la moyenne de classe sur 44 modèles comparables.

Combien coûte un Bomag BW80 d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de Bomag BW80 d'occasion vont actuellement de 7 703 € à 15 742 €, la moyenne du marché se situant autour de 12 111 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 3 annonces actives, mises à jour quotidiennement.

Envoi privé

Envoyez-moi par e-mail le Bomag BW80 sous-évalué de cette semaine.

2 annonces sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

MarqueBomag
ModèleBW80
Spécifications · Comparaison

Comment le BW80 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

En un coup d'œil
Classe de poids
2 t
1.5 t
1.5 t
Puissance
Moteur
Kubota D902
Kubota D1105
Kubota D1105
Puissance
15–20 hp
21.9 hp
20–22 hp
Dimensions
Poids en ordre de marche
1,470–1,620 kg
1,590 kg
1,470–1,500 kg
Longueur
1,860 mm
2,295 mm
2,222 mm
Largeur
850 mm
937 mm
874 mm
Hauteur
2,300 mm
2,210 mm
2,402 mm
Plage de travail
Largeur du tambour
800 mm
800 mm
820 mm
Diamètre du tambour
455 mm
620 mm
Force centrifuge
8–17 kN
17 kN
Fréquence de vibration
42–63 Hz
61 Hz
Amplitude
0.5 mm
0.43 mm
Transmission
Vitesse de déplacement
9 km/h
6.8 km/h
Marché
Prix demandé moyen · UE
€12k
€13k
Fourchette de prix
€8k€16k
€13k€13k
Annonces actives
3
2
0
Spécifications · fiches techniques du fabricantPrix · annonces récentes des concessionnaires, fenêtre glissante
À propos · Bomag BW80

Aperçu

The Bomag BW80 is a light tandem vibratory roller in the walk-behind and ride-on compactor class, with an operating weight of 1550 kg and an engine output of 20 hp. It is designed for compaction work on asphalt and granular materials in confined or smaller-scale working environments. The machine sits within a well-established segment of the Bomag product range, a manufacturer recognised for compaction equipment across global construction markets.

Applications typiques

Lieu d'utilisation de cette machine

The BW80 is suited to compaction of asphalt patches, footpaths, car parks, driveways, and trench reinstatement work where a larger tandem roller cannot manoeuvre effectively. Its weight class makes it appropriate for surface and base-course compaction on smaller paving contracts and municipal maintenance programmes. Rental fleets and civil contractors engaged in road repair and landscaping infrastructure work represent the primary user base for machines in this category.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

Inspection of any light tandem roller in this class should begin with the drum surfaces, checking for flat spots, cracks, or uneven wear that would compromise compaction quality and require drum replacement. The vibration system, including eccentric shaft bearings and the exciter mechanism, should be assessed for abnormal noise or excessive play, as these components are subject to high cyclic loading. Engine condition should be evaluated through oil analysis history where available, and coolant and hydraulic fluid condition should be checked at inspection. The articulation joint and steering system should move freely without binding or excessive play. Buyers should request full service records and verify that the vibration system has been serviced at manufacturer-recommended intervals. Machines used extensively in asphalt work may show accelerated drum wear compared to those used primarily on granular material, and this distinction is worth clarifying with the seller.

Marché actuel

Position tarifaire

Within the light tandem roller segment, the BW80 is cross-shopped primarily against the Ammann ARX12 and the Hamm HD8. At 1550 kg operating weight and 20 hp, the BW80 sits at a comparable weight point to these competitors, and buyers typically evaluate differences in drum width, drum diameter, amplitude and frequency specifications, and dealer support network coverage when choosing between them. The Ammann ARX12 and Hamm HD8 each carry different drum geometry and drive configurations that influence compaction performance on specific surface types, making specification comparison essential rather than brand preference alone. Within the BW80's own price band, the attributes that drive variation are accumulated service hours, overall mechanical condition, drum surface integrity, the presence or absence of a canopy or ROPS frame, and whether the machine has been maintained to a documented service schedule. Configuration differences such as articulated steering condition and vibration system serviceability also affect where an individual unit positions itself competitively.

Notre équipe

Trouvez-moi un Bomag BW80.

Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Bomag BW80. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.

Lancer une demande