Caterpillar 906 d'occasion : 18 annonces en direct, €33k–€70k

Combien coûte un Caterpillar 906 d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de Caterpillar 906 d'occasion vont actuellement de 33 284 € à 69 950 €, la moyenne du marché se situant autour de 45 669 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 18 annonces actives, mises à jour quotidiennement.

Envoi privé

Envoyez-moi par e-mail le Caterpillar 906 sous-évalué de cette semaine.

12 annonces sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

Spécifications · Comparaison

Comment le 906 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

Caterpillar

906

En un coup d'œil

Classe de poids

6 t

5 t

Puissance

Moteur

Cat C3.3B / C3.4

Liebherr D 504

Volvo D3.3J / Deutz BF4L 1011FT (early)

Puissance

68–70 hp

60–68 hp

58–75 hp

Dimensions

Poids en ordre de marche

4,950–5,640 kg

5,240–5,835 kg

4,761–5,500 kg

Longueur

5,040–5,640 mm

5,300–5,400 mm

5,298–5,500 mm

Largeur

1,829–1,872 mm

2,050 mm

1,759–1,900 mm

Hauteur

2,469–2,682 mm

2,700–2,780 mm

2,580–2,707 mm

Plage de travail

Capacité du godet

0.61–1.2 m³

0.8–1.6 m³

0.8–1.5 m³

Force d'arrachement

42–46 kN

44–48 kN

43–55 kN

Hauteur de levage

3,120–3,220 mm

2,550 mm

3,217–3,260 mm

Transmission

Vitesse de déplacement

19–35 km/h

20–30 km/h

30 km/h

Marché

Prix demandé moyen · UE

€46k

€33k

€31k

Fourchette de prix

€33k – €70k

€33k – €34k

€20k – €49k

Annonces actives

18

3

12

À propos · Caterpillar 906

Aperçu

The Caterpillar 906 is a compact wheel loader in the sub-6-tonne class, combining an operating weight of 5,599 kg with an engine output of 68 hp. Its 0.9 m3 bucket capacity positions it at the productive end of the small wheel loader segment, suited to operators who require genuine material-handling capability without the footprint of a mid-size machine. Built to Cat's established driveline and hydraulic standards, the 906 represents a widely recognised entry point into the Caterpillar wheel loader range.

Applications typiques

Lieu d'utilisation de cette machine

Compact wheel loaders of this class are regularly deployed in agricultural yards, landscaping operations, municipal works, and light construction sites where maneuverability in confined spaces is a priority. The 0.9 m3 bucket makes the 906 capable of handling aggregates, soil, woodchip, and loose bulk materials at a productive cycle rate. Its power-to-weight ratio also supports pallet fork and sweeper attachment work, broadening its utility across mixed-duty environments.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

Inspection of a used Caterpillar 906 should begin with a full walk-around for structural cracks at the articulation joint and loader arms, as these areas absorb the greatest cyclic stress in daily loading work. Check hydraulic cylinder seals and hose routing for leaks, and operate the bucket through full curl and lift cycles to confirm smooth, consistent response without cavitation noise. Tyre condition is a significant cost variable on compact wheel loaders, so assess remaining tread depth and sidewall integrity carefully. Request service records to verify filter and fluid change intervals, and confirm that the quick-coupler mechanism, if fitted, locks and releases positively under load. A cold-start inspection is advisable to observe initial oil pressure response and to identify any blue or white exhaust smoke that may indicate internal engine wear.

Marché actuel

Position tarifaire

Within the compact wheel loader segment, the Caterpillar 906 is most commonly cross-shopped against the Volvo L30 and the Liebherr L507. The 906 carries a modest weight advantage over both in this class grouping, while its 68 hp engine output and 0.9 m3 bucket sit in the same competitive band. The Liebherr L507 is often noted for its articulation geometry and cab ergonomics, while the Volvo L30 competes on driveline refinement and service network coverage. Within any group of 906 units on the market, the attributes that move a machine through its price band are accumulated operating hours, service history documentation, tyre condition and remaining tread depth, the presence of quick-coupler systems, and the specification of additional attachments such as forks or high-tip buckets. Configuration choices, including cab versus canopy and manual versus ride-control hydraulics, also influence where a given unit sits relative to others of the same model year.

Comment nous analysons le marché →

Restez dans la fourchette