35,486 kg215 hpMoyenne du marché €61k · 6 annonces · 4 sous le prix du marché
Les prix de vente se situent entre €50k et €70k, environ 13% en dessous de la moyenne du marché.
Ce modèle se situe 19% en dessous de de la moyenne de classe sur 14 modèles comparables.
Chez les concessionnaires indépendants européens, les annonces de Fuchs MHL350 d'occasion vont actuellement de 49 900 € à 69 900 €, la moyenne du marché se situant autour de 60 997 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 6 annonces actives, mises à jour quotidiennement.
4 annonces sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.
Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.
The Fuchs MHL350 is a heavy-duty rail or portal-mounted material handler in the 35-tonne class, producing 215 hp and configured with a 0.6 m³ bucket capacity. At an operating weight of 35,486 kg, it occupies the upper segment of mid-range material handlers, designed for high-throughput bulk and scrap handling duties. The machine is manufactured by Fuchs, a brand long associated with purpose-built material-handling equipment for industrial and port environments.
Material handlers of this class are deployed in scrap yards, steel mills, recycling facilities, ports, and bulk-material transfer stations where repeated lifting, sorting, and loading cycles are required. The MHL350's weight class and power output suit it to continuous-duty grapple and bucket work, including loading shredders, feeding conveyor systems, and sorting ferrous and non-ferrous material. Its configuration also makes it suitable for timber handling and waste-processing operations where reach and lift capacity are prioritised over mobility.
Prospective buyers should commission a full hydraulic circuit inspection, paying particular attention to the slew ring, boom cylinder seals, and grapple or bucket attachment interface, as these components carry the highest cycle loads on material handlers of this class. Engine condition should be verified through oil analysis and a review of service records, with attention to cooling system maintenance given the sustained duty cycles typical of scrap and port environments. Structural inspection of the undercarriage, including track frames and travel drives where applicable, is advisable. Buyers should confirm that all safety systems, including overload protection and cab guarding, are operational and compliant with applicable regional regulations before completing a purchase.
The European market average for the Fuchs MHL350 stands at EUR 66,067, with a typical transaction range of EUR 49,900 to EUR 89,900 depending on age, hours, and specification. Machines at the lower end of the range generally reflect higher hours or older configurations, while upper-range units tend to represent recent model years or low-utilisation examples. Principal competitors in the same weight and duty class include the Sennebogen 825 and Sennebogen 830, both of which address similar industrial handling applications and should be considered as direct alternatives when evaluating availability and parts support in a given region.
Prix demandé moyen affiché comme delta par rapport à la moyenne de la classe (€61k).
Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Fuchs MHL350. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.
Lancer une demande