48,800 kg255 hpMoyenne du marché €109k · 3 annonces · 2 sous le prix du marché
Les prix de vente se situent entre €46k et €164k, environ 56% au-dessus de la moyenne du marché.
Ce modèle se situe 45% au-dessus de de la moyenne de classe sur 14 modèles comparables.
Chez les concessionnaires indépendants européens, les annonces de Fuchs MHL360 d'occasion vont actuellement de 45 900 € à 164 160 €, la moyenne du marché se situant autour de 108 933 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 3 annonces actives, mises à jour quotidiennement.
2 annonces sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.
Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.
The Fuchs MHL360 is a heavy-duty rail or rubber-tyred material handler in the upper-mid to large handler class, with an operating weight of 48800 kg and an engine output of 255 hp. It is designed for high-throughput bulk and scrap handling operations where lift capacity and reach are primary requirements. The machine is equipped with a bucket capacity of 0.8 m3, positioning it for demanding industrial and port-side applications.
Material handlers of this class are deployed in scrapyard sorting, steel-mill feed operations, port bulk-cargo handling, and waste-processing facilities where continuous duty cycles and precise load placement are required. The size and power rating of the MHL360 make it suited to operations that demand both substantial lift capacity and extended working reach. It is commonly paired with grapples or magnets in addition to bucket attachments, depending on the material stream being processed.
Buyers inspecting a used MHL360 should prioritise a thorough assessment of the slewing ring for wear and play, as this component is subject to intense cyclic loading in continuous handler duty. The condition of the hydraulic system, including pumps, control valves, and hose routing, warrants close attention given the machine's high-pressure demands. Engine hours should be verified against service records, and the undercarriage or travel gear should be examined for wear relative to the documented workload. A pre-purchase inspection by an independent engineer familiar with large material handlers is advisable before committing at any point in the price range.
On the European used market, the MHL360 carries an average asking price of EUR 108933, with the broader price range running from EUR 45900 at the lower end to EUR 164160 for late, low-hour examples. This spread reflects significant variation in age, condition, and specification across available stock. Principal competitors in this weight and capacity bracket include the Sennebogen 835 and Sennebogen 830, both of which trade in comparable segments and should be evaluated alongside the Fuchs when sourcing in this class.
Prix demandé moyen affiché comme delta par rapport à la moyenne de la classe (€109k).
Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Fuchs MHL360. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.
Lancer une demande