2,475 kg31 hpMoyenne du marché €13k · 4 annonces · 1 sous le prix du marché
Les prix de vente se situent entre €11k et €15k, environ 42% en dessous de la moyenne du marché.
Ce modèle se situe 51% en dessous de de la moyenne de classe sur 44 modèles comparables.
Chez les concessionnaires indépendants européens, les annonces de Hamm HD10 d'occasion vont actuellement de 11 370 € à 14 500 €, la moyenne du marché se situant autour de 12 613 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 4 annonces actives, mises à jour quotidiennement.
1 annonce sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.
Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.
The Hamm HD10 is a tandem vibratory roller in the light compactor class, with an operating weight of 2475 kg and an engine output of 31 hp. It is designed for asphalt and granular-material compaction on smaller paving and civil works projects. The machine sits at the compact end of the tandem roller segment, where maneuverability and site access are primary considerations alongside compaction performance.
The HD10 is suited to footpath resurfacing, car park construction, small road repairs, and confined paving areas where larger rollers cannot operate efficiently. Its weight class makes it appropriate for compacting asphalt layers in urban environments, courtyard works, and residential infrastructure projects. Contractors in landscaping, municipal maintenance, and light civil construction routinely deploy machines in this category.
When inspecting a used HD10 or comparable light tandem roller, prioritize a close examination of both drums for cracks, flat spots, or corrosion, as drum condition directly affects compaction quality and replacement is a significant undertaking. Check the vibration system for correct operation on both amplitude settings and listen for irregular bearing noise during exciter engagement. Inspect all hydraulic lines, fittings, and the articulation joint for leaks or wear, and verify that steering response is smooth and free of play. Review available service records to confirm that drum scraper bars, water sprinkling systems, and engine servicing have been maintained. A thorough visual check of the frame, particularly around the articulation hinge, will indicate whether the machine has sustained structural stress in service.
Within the light tandem roller segment, the Hamm HD10 is most frequently cross-shopped against the Ammann ARX26 and the Wacker Neuson RD27. The ARX26 and RD27 carry slightly higher operating weights in their respective configurations, which can influence suitability for specific compaction specifications. Hamm's reputation for drum quality and compaction consistency positions the HD10 competitively against these alternatives for buyers prioritizing finish quality on asphalt. Within this class, the principal attributes that move a unit within its price band are recorded operating hours, overall mechanical condition, drum condition and wear, service history documentation, the presence of a canopy or ROPS frame, and whether the machine has been maintained to manufacturer intervals. Units with low hours, full service records, and intact protection structures consistently attract stronger buyer interest than otherwise comparable machines offered below the class average.
Prix demandé moyen affiché comme delta par rapport à la moyenne de la classe (€13k).
Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Hamm HD10. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.
Lancer une demande