ExcavatorEurope

Kobelco SK350

36,093 kg264 hpMoyenne du marché €55k · 5 annonces · 1 sous le prix du marché

Vue de côtéKobelco SK350
Kobelco SK350 side elevation
Poids en ordre de marche
36,093 kg
Longueur
11,203 mm
Fig · proportionnel à la fiche technique · pelle sur chenilles
Marché en direct

5 prix demandés actifs en Europe

Moyenne du marché€55k

Les prix de vente se situent entre €50k et €60k, environ 14% en dessous de la moyenne du marché.

NL
€77k
BE
€48k
DK
€73k
PL
€65k
IT
€27k
  • 201514,706 hrs · NL · nom du concessionnaire masqué€45k
Basé sur 5 annonces de concessionnaires récemment consultées.Au 15 Sept 2026

Ce modèle se situe 21% en dessous de de la moyenne de classe sur 152 modèles comparables.

Combien coûte un Kobelco SK350 d'occasion en Europe ?

Chez les concessionnaires indépendants européens, les annonces de Kobelco SK350 d'occasion vont actuellement de 49 700 € à 60 140 €, la moyenne du marché se situant autour de 54 633 €. L'année, les heures de fonctionnement et la configuration font varier le prix dans cette fourchette. Sur la base de 5 annonces actives, mises à jour quotidiennement.

Envoi privé

Envoyez-moi par e-mail le Kobelco SK350 sous-évalué de cette semaine.

1 annonce sous le prix du marché en ce moment. Nous vous répondons dans les 15 minutes en vous proposant les offres les plus pertinentes par rapport à vos critères.

MarqueKobelco
ModèleSK350
Spécifications · Comparaison

Comment le SK350 se positionne dans sa catégorie.

Les concurrents les plus proches sont sélectionnés automatiquement par catégorie et classe de poids. Spécifications issues des fiches techniques des fabricants ; prix issus des annonces récentes des concessionnaires.

En un coup d'œil
Classe de poids
36 t
36 t
36 t
Puissance
Moteur
Hino JO8E-TM
Liebherr D934 L A7
Komatsu SAA6D114E-6
Puissance
264 hp
268 hp
257 hp
Dimensions
Poids en ordre de marche
36,093 kg
36,050 kg
35,900 kg
Longueur
11,203 mm
11,450 mm
11,340 mm
Largeur
3,400 mm
2,990 mm
3,190 mm
Hauteur
3,161 mm
3,150 mm
3,400 mm
Longueur de transport
11,203 mm
11,450 mm
11,340 mm
Plage de travail
Capacité du godet
1.72 m³
1.5 m³
1.98 m³
Profondeur de fouille max.
7,564 mm
8,010 mm
7,380 mm
Portée maximale
11,062 mm
12,170 mm
11,900 mm
Transmission
Vitesse de déplacement
5.6 km/h
5.1 km/h
5.6 km/h
Marché
Prix demandé moyen · UE
€55k
€51k
€81k
Fourchette de prix
€50k€60k
€46k€58k
€64k€92k
Annonces actives
5
3
12
Spécifications · fiches techniques du fabricantPrix · annonces récentes des concessionnaires, fenêtre glissante
À propos · Kobelco SK350

Aperçu

The Kobelco SK350 is a large crawler excavator in the 36-tonne class, producing 264 hp and carrying a bucket capacity of 1.72 m3. It occupies the upper tier of the mid-to-large excavator segment, positioned above 30-tonne machines and suited to demanding civil and earthmoving cycles. With an operating weight of 36,093 kg, it delivers the ground contact and stability required for high-production digging and lifting tasks.

Applications typiques

Lieu d'utilisation de cette machine

Machines in this weight and power class are deployed on bulk earthmoving, road and infrastructure construction, deep foundation work, and quarry stripping where high bucket capacity and cycle efficiency are priorities. The 1.72 m3 bucket capacity supports productive loading of rigid dump trucks in multi-pass cycles. Secondary applications include heavy demolition, drainage schemes, and large-scale site preparation where reach and breakout force are critical.

Inspection du marché de l'occasion

Ce qu'il faut vérifier avant d'acheter

Inspection of any machine in this class should begin with the undercarriage, as track components, sprockets, idlers, and rollers represent a significant portion of lifecycle cost on heavy crawlers. Buyers should assess remaining track pad and link wear carefully and request any available service records confirming scheduled replacement intervals. The hydraulic system warrants close attention, including checks for cylinder seal integrity, hose condition, and any evidence of contamination in the hydraulic fluid. Engine hours should be verified against physical wear indicators and cross-referenced with available service documentation rather than accepted from hour-meter readings alone. Swing bearing play and boom-to-arm pin wear are common inspection points on machines with high-cycle working histories. Structural inspection of the boom and arm for cracks, especially at high-stress weld points, is standard practice before purchase in this class. Where attachments are included, confirm hydraulic flow compatibility and that all auxiliary circuits are fully operational.

Marché actuel

Position tarifaire

The SK350 competes directly with the Komatsu PC360 and the Liebherr R934 in the 34-to-38-tonne crawler excavator class. Against the PC360, the SK350 is often cross-shopped on fuel efficiency and hydraulic responsiveness, with buyers evaluating dealer network coverage as a differentiating factor depending on region. The Liebherr R934 is typically positioned as a premium European alternative, with buyers weighing build specification and residual value characteristics against the Kobelco. Within the SK350's own price band, the primary drivers of value spread are machine hours, maintenance history, overall undercarriage condition, the presence of quick-coupler systems, and additional attachment packages such as hydraulic thumbs or sorting grabs. Configuration details, including boom and arm length variants, also influence positioning within the band, as does geographic service history and whether the machine has operated in abrasive or corrosive environments.

Notre équipe

Trouvez-moi un Kobelco SK350.

Notre équipe scrute le marché européen et vous envoie trois à sept options réelles pour un Kobelco SK350. Notre choix, et pourquoi. Gratuit tant que nous sommes nouveaux.

Lancer une demande