Informacje · Magni RTH 5.18Przegląd
The Magni RTH 5.18 is a rotating telehandler, a machine class that combines the lift and reach capabilities of a conventional telehandler with full 360-degree superstructure rotation. This characteristic makes it functionally closer to a crane or aerial work platform than a standard fixed-frame telehandler. The RTH designation within the Magni lineup denotes the rotating series, and the 5.18 model designation references the machine's rated capacity and maximum lift height parameters within that series.
Typowe zastosowaniaGdzie ta maszyna jest używana
Rotating telehandlers of this class are used extensively on construction sites where materials must be placed precisely at height and at variable angles without repositioning the carrier. Typical tasks include lifting and placing structural elements, facades, roofing materials, and prefabricated components in residential, commercial, and industrial construction. The rotating function also makes these machines suitable for infrastructure work, utilities installation, and any application requiring repeated lifts across a wide working arc from a single stabilised position.
Kontrola rynku wtórnegoCo sprawdzić przed zakupem
Inspection of a used rotating telehandler should prioritise the condition of the rotation ring and slewing mechanism, as wear or play in these components is costly to address and central to the machine's core function. The telescopic boom sections, wear pads, and cylinder seals warrant close examination, particularly for signs of hydraulic leaks or structural damage from overloading. Stabiliser legs, outrigger pads, and the levelling system should be tested through their full range of travel. Service history documentation, load chart compliance records, and evidence of periodic structural inspections add meaningful assurance to any purchase decision.
Obecna sytuacja rynkowaPozycja cenowa
The European market average for the Magni RTH 5.18 is EUR 142,250, with a typical price range running from EUR 137,900 to EUR 146,600. This relatively narrow spread indicates consistent market pricing for this model with limited variance between units at the lower and upper ends of the range. Magni competes in the rotating telehandler segment alongside manufacturers such as Manitou, JLG, and Merlo, all of whom offer rotating models in comparable lift and capacity classes.
