1,475 kg21 hpLimited recent data, based on 1 older listings
Based on 1 older listings. Current pricing may have shifted, so we show the class range instead.
Most asking prices land between €10k – €62k, with a market average around €22k.
This model sits 66% below the class average across 50 peer models.
We write back within 15 minutes with the strongest matches for your spec.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Ammann ARX12 is a light compactor with an operating weight of 1475 kg and an engine output of 21 hp. It belongs to the small reversible vibratory plate and tandem roller segment, designed for controlled compaction work in confined or access-restricted conditions. Its compact dimensions and moderate power output place it firmly in the light equipment category.
Machines of this class are well suited to compaction tasks on footpaths, driveways, trench backfill, and small paving or landscaping projects. The combination of low operating weight and manageable power makes the ARX12 appropriate for urban worksites where maneuverability and surface sensitivity are priorities. Contractors in civil works, utilities, and groundworks regularly deploy equipment of this type alongside other light compaction machinery.
When inspecting a used ARX12 or comparable light compactor, examine the condition of the vibration system, including exciter bearings and mounting points, as these components absorb significant stress in daily operation. Check the engine for clean oil, absence of smoke, and responsive throttle behavior. Inspect the frame and roller drums for cracks, deformation, or uneven wear patterns that may indicate overloading or poor maintenance. Verify that all service records are present and that routine filter and fluid changes have been performed at appropriate intervals.
The European market average for the Ammann ARX12 is EUR 9800, with the typical price range also centered at that figure based on available data. Competing models in this segment include the Bomag BW80 and the Hamm HD8, both of which occupy a comparable weight and power class. Buyers comparing these machines should evaluate specification differences and local parts support alongside purchase price.
Market average ask shown as delta against the class average (€10k).
We'll read the European market and send three to seven real options for an Ammann ARX12. Our pick, and why. Free while we're new.
Start a request