5,520 kg47 hpMarktdurchschnitt €66k · 5 gelistet · 3 unter Marktwert
Die Angebotspreise liegen bei €61k – €76k, rund 161% über dem Marktdurchschnitt.
Dieses Modell liegt 161% über dem Klassendurchschnitt aus 212 Vergleichsmodellen.
Bei unabhängigen europäischen Händlern liegen gebrauchte Kubota U56 derzeit zwischen 61.460 € und 75.625 €, der Marktdurchschnitt bei etwa 65.519 €. Baujahr, Betriebsstunden und Ausstattung bewegen den Preis innerhalb dieser Spanne. Basierend auf 5 aktiven Inseraten, täglich aktualisiert.
3 Inserate unter Marktwert jetzt. Wir melden uns innerhalb von 15 Minuten mit den besten Übereinstimmungen für Ihre Anforderungen zurück.
Die nächstgelegenen Wettbewerber werden automatisch nach Kategorie und Gewichtsklasse ausgewählt. Technische Daten aus Herstellerdatenblättern; Preise aus aktuellen Händerinseraten.
The Kubota U56 is a 5.5-tonne class conventional-tail-swing mini-excavator producing 47 hp and fitted with a 0.14 m3 bucket capacity. It sits at the upper end of the compact excavator segment, offering a balance of digging performance and site mobility that positions it between lighter sub-5-tonne units and full-size short-radius machines. The operating weight of 5520 kg places it within a class commonly transported on standard flatbed trailers without specialist haulage requirements.
Machines in this weight and power class are well suited to utility trenching, drainage installation, landscaping earthworks, and confined urban construction sites where ground pressure and access restrictions limit the use of larger plant. The 47 hp output supports productive cycle times in medium-density soils, making the class relevant to groundworks contractors, civils subcontractors, and municipal operators. Secondary applications include foundation preparation for residential and light commercial structures where bucket reach and digging depth are more critical than outright machine mass.
Inspection of any used mini-excavator in this class should prioritise the condition of the undercarriage, including track tension, pad wear, and roller and idler play, as undercarriage refurbishment represents a significant cost category. The boom, dipper, and bucket pin bores and bushings should be checked for wear and signs of inadequate greasing. Hydraulic hoses, cylinder seals, and slew ring backlash all merit close attention, particularly on machines that have worked in abrasive or wet conditions. Engine oil condition, coolant integrity, and the service history record are baseline checks before any purchase decision. A pre-purchase inspection by an independent dealer-neutral engineer is advisable for high-value transactions.
On the European used market, the Kubota U56 carries an average asking price of EUR 52600, with the broader price range spanning EUR 48560 to EUR 67980 depending on specification, age, and condition. Direct competitors in the same tonnage band include the JCB 57C-1 and the Yanmar VIO57, both of which address similar buyer requirements and influence achievable resale values for the U56. Buyers evaluating the segment should benchmark U56 listings against prevailing offers for these competitor models to assess relative value at any given point in the market cycle.
Durchschnittlicher Angebotspreis als Delta zum Klassendurchschnitt (€66k).
Unser Team beobachtet den europäischen Markt und schickt Ihnen drei bis sieben echte Optionen für ein Kubota U56. Unsere Wahl, und warum. Kostenlos, solange wir neu sind.
Anfrage starten