Über · Wacker Neuson EZ38Übersicht
The Wacker Neuson EZ38 is a 3.8-tonne class mini-excavator produced by the German-Austrian manufacturer Wacker Neuson, a brand with established presence in the compact construction equipment segment. As a zero-tail-swing machine, the EZ38 is engineered so that the counterweight and upper structure rotate within the width of the tracks, a design that directly addresses working in confined or boundary-sensitive environments. It occupies the upper band of the sub-5-tonne mini-excavator category, sitting above compact 1-to-2-tonne machines and below mid-range 5-to-8-tonne conventional excavators.
Typische AnwendungsbereicheWo diese Maschine eingesetzt wird
The EZ38 is suited to urban construction, utility installation, and landscaping work where access is restricted or proximity to structures, fences, or road traffic limits the swing radius of a conventional excavator. Its class handles tasks including drainage trenching, service-line excavation, foundation preparation for residential extensions, and general earthmoving on congested sites. The zero-tail-swing configuration makes it a practical choice for contractors working alongside walls, in basement dig-outs, or on footpaths where conventional counterweight overhang would create a hazard or obstruction.
Gebrauchtmarkt-InspektionWas Sie vor dem Kauf beachten sollten
When inspecting any used mini-excavator in this class, begin with the undercarriage, as track wear, sprocket condition, and roller seal integrity represent the most significant variable in remaining service life and refurbishment cost. Check all hydraulic lines and couplings for weeping seals, particularly around the boom, arm, and bucket cylinder ends, and confirm that any auxiliary hydraulic circuits function correctly under load. Verify that the swing bearing moves smoothly without play or grinding, and check that the machine swings level without drift when controls are released. Inspect the cab or canopy ROPS structure for any signs of impact damage or repair, and confirm that all safety systems including travel alarms and boom-lowering controls operate as intended. Service history documentation, even partial, is a material indicator of maintenance discipline and strengthens confidence in the machine's represented condition.
Aktueller MarktPreisposition
In the sub-5-tonne zero-tail-swing segment, the EZ38 is cross-shopped primarily against machines such as the Kubota KX040, the Yanmar SV40, and the Bobcat E35 or E42, as well as the Takeuchi TB240 and Doosan DX35Z. Against these competitors, the EZ38's Wacker Neuson lineage brings European market familiarity and a dealer network oriented toward the German-speaking and broader continental European contractor base, which can be relevant for parts availability depending on geography. Within the used market, the attributes that move a specific EZ38 up or down within its value band are accumulated operating hours, whether the machine carries a quick-coupler system, the number and type of hydraulic lines fitted for attachments, overall undercarriage condition including track wear and roller state, cab configuration with or without canopy, and general mechanical and cosmetic condition. Machines with lower hours, full cab, and factory-fitted auxiliary hydraulics consistently attract stronger buyer interest than high-hour open-canopy units with limited attachment compatibility.
