2,475 kg31 hpMarket avg. €13k · 4 listed · 1 below market
Asking prices land at €11k – €15k, around 42% below the market average.
This model sits 51% below the class average across 44 peer models.
Across independent European dealers, used Hamm HD10 listings currently run from €11,370 to €14,500, with a market average around €12,613. Year, operating hours and configuration move the price within that band. Based on 4 active listings, refreshed daily.
1 below-market ask right now. We write back within 15 minutes with the strongest matches for your spec.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Hamm HD10 is a tandem vibratory roller in the light compactor class, with an operating weight of 2475 kg and an engine output of 31 hp. It is designed for asphalt and granular-material compaction on smaller paving and civil works projects. The machine sits at the compact end of the tandem roller segment, where maneuverability and site access are primary considerations alongside compaction performance.
The HD10 is suited to footpath resurfacing, car park construction, small road repairs, and confined paving areas where larger rollers cannot operate efficiently. Its weight class makes it appropriate for compacting asphalt layers in urban environments, courtyard works, and residential infrastructure projects. Contractors in landscaping, municipal maintenance, and light civil construction routinely deploy machines in this category.
When inspecting a used HD10 or comparable light tandem roller, prioritize a close examination of both drums for cracks, flat spots, or corrosion, as drum condition directly affects compaction quality and replacement is a significant undertaking. Check the vibration system for correct operation on both amplitude settings and listen for irregular bearing noise during exciter engagement. Inspect all hydraulic lines, fittings, and the articulation joint for leaks or wear, and verify that steering response is smooth and free of play. Review available service records to confirm that drum scraper bars, water sprinkling systems, and engine servicing have been maintained. A thorough visual check of the frame, particularly around the articulation hinge, will indicate whether the machine has sustained structural stress in service.
Within the light tandem roller segment, the Hamm HD10 is most frequently cross-shopped against the Ammann ARX26 and the Wacker Neuson RD27. The ARX26 and RD27 carry slightly higher operating weights in their respective configurations, which can influence suitability for specific compaction specifications. Hamm's reputation for drum quality and compaction consistency positions the HD10 competitively against these alternatives for buyers prioritizing finish quality on asphalt. Within this class, the principal attributes that move a unit within its price band are recorded operating hours, overall mechanical condition, drum condition and wear, service history documentation, the presence of a canopy or ROPS frame, and whether the machine has been maintained to manufacturer intervals. Units with low hours, full service records, and intact protection structures consistently attract stronger buyer interest than otherwise comparable machines offered below the class average.
Market average ask shown as delta against the class average (€13k).
We'll read the European market and send three to seven real options for a Hamm HD10. Our pick, and why. Free while we're new.
Start a request