4,060 kg25 hpLimited recent data, based on 2 older listings
Based on 2 older listings. Current pricing may have shifted, so we show the class range instead.
Most asking prices land between €13k – €49k, with a market average around €25k.
This model sits 52% above the class average across 212 peer models.
1 below-market ask right now. We write back within 15 minutes with the strongest matches for your spec.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Hitachi ZX38U is a compact mini-excavator with an operating weight of 4060 kg and an engine output of 25 hp. It falls within the 3.5 to 4-tonne class of zero-tail-swing or reduced-swing excavators, a segment widely used across European construction and civil markets. Bucket capacity is rated at 0.1 m3. The model has been in continuous production since 2013, giving the platform a well-established service and parts history.
Mini-excavators in the 4-tonne class are suited to confined urban worksites, residential groundworks, drainage installation, and utility trenching where access is restricted. The ZX38U is also commonly deployed for landscaping, small demolition tasks, and foundation preparation on sites where a larger machine would be impractical. Its compact footprint allows operation inside warehouses, walled gardens, and alongside existing structures without significant site modification.
When inspecting a used ZX38U, prioritise assessment of the undercarriage, including track pads, rollers, and sprockets, as these are high-wear components on any mini-excavator used on abrasive ground. Examine the boom, arm, and bucket pins and bushings for play, and check hydraulic hoses and cylinders for weeping seals or surface scoring. Engine coolant and oil condition should be verified, and service records reviewed to confirm filter and fluid change intervals have been observed. Confirm that the quick-coupler, if fitted, operates correctly and that all auxiliary hydraulic circuits function under load before purchase.
In the European used market, the ZX38U is currently priced at EUR 59000, reflecting demand for well-maintained units of this vintage and specification. Direct competitors in the same weight class include the Wacker Neuson ET35 and the Yanmar VIO38, both of which buyers typically evaluate alongside the Hitachi when sourcing in this segment. The ZX38U's continuous production run from 2013 onward supports parts availability, which is a relevant factor when comparing residual value against rival models.
Market average ask shown as delta against the class average (€38k).
We'll read the European market and send three to seven real options for a Hitachi ZX38U. Our pick, and why. Free while we're new.
Start a request