1,100 kg10 hpMarket avg. €14k · 22 listed · 11 below market
Asking prices land at €9k – €21k, around 44% below the market average.
Across independent European dealers, used Kubota U10 listings currently run from €8,740 to €20,500, with a market average around €14,138. Year, operating hours and configuration move the price within that band. Based on 22 active listings, refreshed daily.
11 below-market asks right now. We write back within 15 minutes with the strongest matches for your spec.
Each row is a step the desk runs through when you ask for a model. Counts come from the live European market: what we read this week, what we'd flag, and what we'd send if you'd asked.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Kubota U10 is a micro-class mini-excavator with an operating weight of 1,100 kg and an engine output of 10 hp, placing it at the lower boundary of the tracked excavator segment. With a bucket capacity of 0.022 m3, it is designed for confined, precision digging tasks where a larger machine cannot safely or practically operate. It belongs to the sub-1,500 kg class, a category defined by minimal ground disturbance, narrow access capability, and low transport overhead.
Machines in this weight and power class are predominantly used for utility trenching, landscaping, and indoor demolition work where doorway or corridor access is required. Municipal and facilities-maintenance contractors also deploy units of this type for pipe repair and cable-laying in pedestrian zones or established gardens where surface damage must be minimised. The compact dimensions make the class a practical fit for hire fleets serving residential construction and renovation contractors.
Inspection of any machine in this class should begin with the undercarriage: rubber tracks of this size wear in proportion to use on hard or abrasive surfaces, and replacement represents a meaningful share of ownership cost. Check slew-ring play by swinging the upper structure and feeling for lateral movement, as bearing wear is common on intensively used micro-excavators. Hydraulic couplings, cylinder seals, and boom-pivot bushings should be examined for weeping, which is a reliable indicator of deferred maintenance. Request service records and verify that engine oil changes and hydraulic filter intervals have been observed. On machines of this power class, confirming that the auxiliary hydraulic circuit functions correctly is important if attachment versatility is part of the intended use case. Finally, inspect the blade and its cylinder for straightness and seal condition, since blade use on hard ground accelerates wear that is not always captured in hour-meter readings.
The Kubota U10 is cross-shopped primarily against the Yanmar SV08 and the Bobcat E10 within the micro-excavator segment. The Yanmar SV08 sits below the U10 in operating weight, making the Kubota the heavier and generally more stable machine for grading tasks, while the Bobcat E10 occupies a comparable weight band and competes directly on brand recognition and dealer-network reach. Within the U10's own price band, the principal factors that move a unit toward the upper end of the range are low recorded hours, the presence of additional attachments such as hydraulic thumb or breaker circuits, offset-boom configuration, and documented service history. Units with a blade in good condition, a well-maintained undercarriage, and current safety certifications consistently attract stronger positioning than comparable-hour machines without these attributes. High hour counts, worn tracks, or absent service records place a unit below the class average.
Market average ask shown as delta against the class average (€14k).
We'll read the European market and send three to seven real options for a Kubota U10. Our pick, and why. Free while we're new.
Start a request