Mini Excavator2014–2021Europa

Bobcat E17

1,749 kg15 hpMarktgemiddelde €14k · 16 aangeboden · 10 onder de marktprijs

ZijaanzichtBobcat E17
Bobcat E17 side elevation
Bedrijfsgewicht
1,749 kg
Lengte
3,501 mm
Fig · op schaal · minigraafmachine
Live markt

16 actieve vraagprijzen in Europa

Marktgemiddelde€14k

Vraagprijzen liggen tussen €14k en €16k, ongeveer 43% onder het marktgemiddelde.

NL
€34k
BE
€21k
DE
€37k
IT
€19k
PL
€27k
  • 2019NL · naam dealer verborgen€5k
  • 2021NL · naam dealer verborgen€5k
  • 20182,253 hrs · BE · naam dealer verborgen€13k
  • 2018NL · naam dealer verborgen€13k
Gebaseerd op 16 actieve dealeraanbiedingen in ons netwerk.Per 16 Sept 2026

Hoeveel kost een gebruikte Bobcat E17 in Europa?

Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Bobcat E17 momenteel van € 13.900 tot € 15.800, met een marktgemiddelde rond € 14.279. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 16 actieve aanbiedingen, dagelijks bijgewerkt.

Privé verzonden

Mail me deze week de laaggeprijsde Bobcat E17.

10 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.

MerkBobcat
ModelE17
Als je ons deze week om een E17 had gevraagdVan het team · 16 gelezenWat het team zou hebben gedaan

16 kandidaten gefilterd, naar een handvol uitverkorenen.

Elke rij is een stap die het team doorloopt als je om een model vraagt. De cijfers komen van de live Europese markt: wat we deze week hebben gelezen, wat we zouden markeren, en wat we zouden sturen als je het had gevraagd.

  • Deze week gelezen
    16
  • Boven marktprijs
    6
  • Onder marktprijs
    10
  • Naar je sturencap 3
    3
Specificatie · Vergelijking

Hoe de E17 het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

 
Bobcat
E17
2014–2021
JCB
16C-1
Takeuchi
TB216
In één oogopslag
Gewichtsklasse
1.7 t
1.7 t
1.8 t
Vermogen
Motor
Kubota D902
Perkins 403D-07
Yanmar 3TNV74
Vermogen
15 hp
15 hp
15 hp
Afmetingen
Bedrijfsgewicht
1,749 kg
1,749 kg
1,770 kg
Lengte
3,501 mm
3,860 mm
3,870 mm
Breedte
980 mm
981 mm
1,300 mm
Hoogte
2,350 mm
2,326 mm
2,255 mm
Transportlengte
3,501 mm
3,860 mm
3,870 mm
Werkbereik
Bakinhoud
0.04 m³
0.04 m³
0.04 m³
Max. graafdiepte
2,249 mm
2,423 mm
2,390 mm
Max. bereik
3,919 mm
4,045 mm
4,090 mm
Zwenkstraal staart
270 mm
1,103 mm
1,075 mm
Aandrijving
Rijsnelheid
4.8 km/h
3.5 km/h
4.2 km/h
Markt
Gemiddelde vraagprijs · EU
€14k
€14k
€20k
Prijsklasse
€14k€16k
€14k€15k
€16k€25k
Actieve aanbiedingen
16
14
16
Specificaties · fabrikantsdatasheetsPrijzen · recente dealeraanbiedingen, lopend venster
Over · Bobcat E17

Overzicht

The Bobcat E17 is a compact mini-excavator produced between 2014 and 2021, sitting in the sub-2-tonne class with an operating weight of 1749 kg and an engine output of 15 hp. Its 0.04 m3 bucket capacity positions it at the lighter, more confined-access end of the mini-excavator segment. The machine is designed for work where weight limits, transport simplicity, and tight site conditions are primary constraints.

Typische toepassingen

Waar deze machine wordt gebruikt

The E17 class is suited to residential landscaping, utility trenching, and site preparation work in confined urban environments where larger machines cannot operate safely or legally. Garden construction, drainage installation, and indoor demolition in accessible structures are representative use cases for this weight and power bracket. The low operating weight also makes the machine practical for towing with light commercial vehicles in markets where that is permitted.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

When inspecting a used E17, prioritise a thorough check of the undercarriage, including rubber track condition, track tension, and the state of rollers and idlers, as these components represent meaningful replacement cost on any machine in this class. Examine the slew ring and boom pivot points for play or unusual wear, and cycle all hydraulic functions fully to check for drift, slow response, or leaks at hose connections and cylinder seals. Request maintenance records to verify oil and filter service intervals have been observed, and confirm the engine runs cleanly without smoke across the operating range. On machines of this age and weight class, the presence of an intact ROPS/TOPS cab or canopy structure in compliant condition is a practical requirement for most commercial site use. Attachments and hydraulic compatibility should be verified before purchase if the intended application requires anything beyond a standard digging bucket.

Huidige markt

Prijspositie

Within the sub-2-tonne mini-excavator segment, the Bobcat E17 is most commonly cross-shopped against the JCB 16C-1 and the Takeuchi TB216. The JCB 16C-1 competes directly on operating weight and application overlap, while the Takeuchi TB216 is a comparable Japanese-manufactured alternative that buyers often evaluate for build quality and parts availability preferences. The Bobcat brand carries broad dealer network recognition in European and North American markets, which can influence perceived support value. Within any given market segment, the attributes that move a specific unit toward the stronger end of its price band include lower accumulated hours, a well-documented service history, the presence of additional hydraulic lines or auxiliary circuits, quick-coupler fitment, and the availability of matched attachments such as buckets, grading blades, or compaction plates. Machines in poor cosmetic or mechanical condition, with no service records, or configured in base specification without auxiliary hydraulics, typically attract less buyer interest and sit toward the lower end of the range.

Het team

Vind een Bobcat E17.

Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een Bobcat E17. Onze keuze, en waarom. Gratis zolang we nieuw zijn.

Aanvraag starten