Gebruikte Caterpillar 316: 13 live aanbiedingen, €38k–€74k

Hoeveel kost een gebruikte Caterpillar 316 in Europa?

Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Caterpillar 316 momenteel van € 38.400 tot € 73.500, met een marktgemiddelde rond € 55.491. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 13 actieve aanbiedingen, dagelijks bijgewerkt.

Privé verzonden

Mail me deze week de laaggeprijsde Caterpillar 316.

6 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.

Specificatie · Vergelijking

Hoe de 316 het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

Caterpillar

316

In één oogopslag

Gewichtsklasse

18 t

16 t

Vermogen

Motor

Cat C4.4 ACERT

Isuzu AP-4HK1X

Volvo D4J

Vermogen

113–117 hp

143–172 hp

146 hp

Afmetingen

Bedrijfsgewicht

17,610–18,030 kg

16,800–19,500 kg

16,449 kg

Lengte

8,000–8,550 mm

8,520 mm

8,884 mm

Breedte

2,590–2,640 mm

2,530–2,730 mm

2,590 mm

Hoogte

3,000–3,100 mm

3,130–3,580 mm

2,902 mm

Transportlengte

8,550 mm

8,520–8,810 mm

8,884 mm

Werkbereik

Bakinhoud

0.53–0.76 m³

0.52–0.82 m³

0.68 m³

Max. graafdiepte

5,950–6,100 mm

5,830 mm

6,470 mm

Max. bereik

8,690–8,800 mm

9,330 mm

9,353 mm

Aandrijving

Rijsnelheid

5.1–5.5 km/h

35 km/h

5.6 km/h

Markt

Gemiddelde vraagprijs · EU

€55k

€57k

€62k

Prijsklasse

€38k – €74k

€52k – €65k

€42k – €75k

Actieve aanbiedingen

13

14

4

Over · Caterpillar 316

Overzicht

The Caterpillar 316 is a mid-size hydraulic excavator positioned in the 18-tonne operating weight class, producing 117 hp and fitted with a 0.76 m3 bucket capacity. It represents Caterpillar's offering in a segment that balances reach and digging force with transport practicality, making it a widely specified machine across general civil and groundworks applications. The 316 carries the engineering standards and dealer network associated with the Caterpillar brand, which typically influences both its availability and its position within its competitive set.

Typische toepassingen

Waar deze machine wordt gebruikt

The 18-tonne excavator class is routinely deployed in foundation excavation, utility trenching, road construction, and site preparation work where a larger machine would be impractical or uneconomical. The 0.76 m3 bucket capacity suits bulk earthmoving cycles at this scale, while the operating weight provides sufficient ground stability for slope and embankment work. Machines in this class are also used in agricultural drainage, demolition support, and landscaping contracts that require a capable but maneuverable platform.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

Inspection of an 18-tonne excavator at this class should begin with a thorough undercarriage assessment, as track components, rollers, idlers, and sprockets represent a significant portion of refurbishment exposure and wear rate correlates directly with the surface types the machine has operated on. The hydraulic system warrants close attention, including cylinder seal condition on the boom, arm, and bucket, hose routing integrity, and any evidence of internal bypass indicated by slow or uneven movement under load. Engine hours alone are an incomplete indicator of condition; review service records for filter and fluid change intervals, and inspect for signs of deferred maintenance such as worn track tension or degraded final drive seals. Confirm the configuration matches the intended application, particularly arm length and counterweight specification, as these affect both performance and transport logistics. Machines with documented single-owner histories and fleet maintenance programmes typically present lower reconditioning risk than those with fragmented ownership records.

Huidige markt

Prijspositie

Within the 18-tonne excavator segment, the Caterpillar 316 is directly cross-shopped against the Hitachi ZX170 and the Volvo EC160. The ZX170 sits slightly below the 316 in operating weight and is recognised for its hydraulic responsiveness, while the EC160 is positioned as a comparable tonnage machine with Volvo's characteristic emphasis on operator comfort and fuel management. The 316 differentiates itself through Caterpillar's global parts distribution and the familiarity of its control architecture to operators trained on Cat equipment. Within the used market, position within the price band is driven by accumulated service hours, whether the machine carries a long-reach or standard arm configuration, the presence of factory-fit attachments such as hydraulic quick couplers or additional auxiliary lines, geographic condition history including corrosive or abrasive operating environments, and the completeness of documented service records.

Hoe we de markt analyseren →

Blijf in het bereik