CompactorEuropa

Dynapac CC120

2,600 kg35 hpBeperkte recente gegevens, gebaseerd op 0 oudere aanbiedingen

ZijaanzichtDynapac CC120
Dynapac CC120 side elevation
Bedrijfsgewicht
2,600 kg
Lengte
2,395 mm
Fig · op schaal · wals
Live markt

Wals · marktoverzicht

Wals gem.€22k

De meeste vraagprijzen liggen tussen €10k en €62k, met een marktgemiddelde rond €22k.

NL
€44k
CZ
€49k
BG
€26k
PL
€16k
BE
€13k
We zoeken in heel Europa en sturen je binnen 24 uur een gecontroleerde selectie met directe links naar de verkoper.
Vraagprijzen in ons Europese netwerk.Per 12 Oct 2026
Gratis selectie voor kopers

De beste beschikbare deals voor Dynapac CC120 in Europa.

We vergelijken prijs, bouwjaar, draaiuren en geschiktheid. Daarna sturen we je binnen 24 uur een gecontroleerde selectie met directe links naar de verkoper.

MerkDynapac
ModelCC120

Gratis voor kopers. Geen account nodig.

Specificatie · Vergelijking

Hoe de CC120 het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

 
Dynapac
CC120
Bomag
BW120
Ammann
ARX26
In één oogopslag
Gewichtsklasse
2.5 t
2.5 t
2.5 t
Vermogen
Motor
Kubota D1703-M
—
Kubota D1803-CR
Vermogen
29–35 hp
33–34 hp
33.5 hp
Afmetingen
Bedrijfsgewicht
2,300–2,600 kg
2,600–2,750 kg
2,515 kg
Lengte
2,395–2,490 mm
2,530 mm
2,500 mm
Breedte
1,310–1,340 mm
1,200 mm
1,350 mm
Hoogte
2,540–2,640 mm
1,810 mm
1,935 mm
Werkbereik
Trommelbreedte
1,200 mm
1,200 mm
1,200 mm
Trommeldiameter
682–700 mm
701 mm
696 mm
Centrifugaalkracht
27 kN
28–41 kN
46.5 kN
Trilfrequentie
58 Hz
55–67 Hz
66 Hz
Amplitude
0.5 mm
2.5 mm
0.5 mm
Aandrijving
Rijsnelheid
7–10 km/h
10–12 km/h
11 km/h
Markt
Gemiddelde vraagprijs · EU
—
€14k
€16k
Prijsklasse
— – —
€13k – €15k
€13k – €19k
Actieve aanbiedingen
0
3
6
Specificaties · fabrikantsdatasheetsPrijzen · recente dealeraanbiedingen, lopend venster
Over · Dynapac CC120

Overzicht

The Dynapac CC120 is a single-drum vibratory soil compactor in the light-to-mid tandem roller segment, with an operating weight of 2,600 kg and an engine output of 35 hp. It is positioned as a compact, maneuverable machine suited to sites where a larger compactor would be impractical. Dynapac's engineering focus on consistent drum frequency and straightforward serviceability gives the CC120 a recognized standing among contractors who prioritize reliability in this weight class.

Typische toepassingen

Waar deze machine wordt gebruikt

The CC120 is used primarily for compacting granular soils, sub-base layers, and asphalt patches on road maintenance, utility reinstatement, and small-to-medium paving projects. Its compact footprint makes it well suited to confined urban work zones, parking areas, and trench backfill operations. Contractors also deploy machines in this class for shoulder work and residential infrastructure where heavier equipment cannot maneuver effectively.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

Before purchasing a used CC120 or any compactor in this class, inspect the drum shell closely for cracks, flat spots, or uneven wear patterns that indicate historical overloading or impact damage. Check the vibration system by running the machine and confirming that amplitude and frequency engage without abnormal noise or excessive heat buildup at the bearing housings. Examine all hydraulic lines, fittings, and the steering articulation joint for leaks and play, as these are high-wear points on articulated compactors. Review the engine compartment for oil leaks and coolant condition, and confirm that the air filter housing and fuel system show evidence of routine maintenance. Request any available service records, and if none are present, factor the cost of a full fluid service and inspection into your acquisition planning.

Huidige markt

Prijspositie

Within the light compactor segment, the CC120 is most frequently cross-shopped against the Bomag BW120 and the Ammann ARX26. Compared with the Bomag BW120, which competes directly on weight and power, the CC120 is often evaluated on parts availability and dealer support infrastructure. The Ammann ARX26 targets a similar operating weight but is positioned with a focus on compaction measurement technology, which appeals to contractors who require documented compaction data for quality-assurance purposes. Across all three models, the attributes that move a machine within its price band are accumulated operating hours, overall mechanical condition, drum surface condition, the presence of a functional ROPS or cab enclosure, and any additional compaction-monitoring attachments. Service history documentation and geographic proximity to dealer support networks also influence where a specific unit lands within the spread.

Het team

Vind een Dynapac CC120.

Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een Dynapac CC120. Onze keuze, en waarom. Gratis zolang we nieuw zijn.

Aanvraag starten