Prijs gebruikte Hitachi ZX85US: €25k–€83k in Europa

Hoeveel kost een gebruikte Hitachi ZX85US in Europa?

Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Hitachi ZX85US momenteel van € 24.750 tot € 83.334, met een marktgemiddelde rond € 52.388. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 27 actieve aanbiedingen, dagelijks bijgewerkt.

Gratis selectie voor kopers

De beste beschikbare deals voor Hitachi ZX85US in Europa.

We vergelijken prijs, bouwjaar, draaiuren en geschiktheid. Daarna sturen we je binnen 24 uur een gecontroleerde selectie met directe links naar de verkoper.

Specificatie · Vergelijking

Hoe de ZX85US het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

Hitachi

ZX85US

In één oogopslag

Gewichtsklasse

—

Vermogen

Motor

—

Vermogen

—

Afmetingen

Bedrijfsgewicht

—

Lengte

—

Breedte

—

Hoogte

—

Transportlengte

—

Werkbereik

Bakinhoud

—

Max. graafdiepte

—

Max. bereik

—

Zwenkstraal staart

—

Aandrijving

Rijsnelheid

—

Markt

Gemiddelde vraagprijs · EU

€52k

Prijsklasse

€25k – €83k

Actieve aanbiedingen

27

Over · Hitachi ZX85US

Overzicht

The Hitachi ZX85US is a short-radius mini-excavator positioned at the upper end of the compact excavator segment, nominally rated in the 8-tonne operating-weight class. The US suffix denotes an ultra-short tail-swing configuration, allowing the counterweight to rotate within or close to the machine's track width, a design priority in confined work environments. Hitachi positions this model as a bridge between mid-range compact machines and full-size crawler excavators, offering greater digging force and stability than smaller mini-excavators while retaining a reduced footprint.

Typische toepassingen

Waar deze machine wordt gebruikt

The ZX85US is suited to urban construction, utility trenching, and drainage work where site access is restricted and swing clearance is at a premium. Its operating-weight class makes it productive for foundation excavation on smaller residential and light-commercial projects, pipeline installation, and landscaping earthworks. The short-radius configuration makes it a practical choice for work alongside structures, inside buildings during demolition or fit-out, and in roadside corridors where equipment must stay within a lane.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

Inspection of the undercarriage is the single most consequential step when evaluating any machine in this class: check track pad condition, sprocket wear, roller seal integrity, and track tension, as these components represent a significant portion of reconditioning cost. The hydraulic system should be assessed for response lag, cylinder drift, and any evidence of seal weeping at the boom, arm, and bucket pins. On short-radius machines specifically, examine the slew ring and its bearing surface for play and noise, as the tighter swing geometry places particular demand on that assembly. Review the service records to confirm oil and filter intervals have been observed; a documented maintenance history meaningfully reduces residual uncertainty. Inspect the cab for evidence of water ingress around the door seals, and verify that any auxiliary hydraulic circuits, quick-coupler solenoids, and control patterns function as configured. Where hours are elevated, factor the likely timing of scheduled component replacements into the total-cost evaluation before committing.

Huidige markt

Prijspositie

In the 8-tonne compact class the ZX85US is routinely cross-shopped against the Kubota KX080, the Komatsu PC88MR, and the Volvo ECR88. Relative to the Kubota KX080, the Hitachi is generally regarded as offering comparable digging performance within a similar weight envelope, with brand preference and dealer support networks influencing the decision. The Komatsu PC88MR competes directly on the short-radius proposition, while the Volvo ECR88 targets buyers who prioritise operator environment and visibility. Within the ZX85US population itself, the attributes that move a machine within its price band are accumulated service hours, maintenance history, attachment configuration including hydraulic quick-coupler and breaker lines, undercarriage wear, and overall condition of the cab and upperstructure. Machines with a hydraulic thumb, a second auxiliary circuit, or recently replaced undercarriage components command a premium over base-specification units with high hours and deferred maintenance.

Hoe we de markt analyseren →

Blijf in het bereik