23,190 kg173 hpMarktgemiddelde €125k · 4 aangeboden · 2 onder de marktprijs
Vraagprijzen liggen tussen €70k en €175k, ongeveer 96% boven het marktgemiddelde.
Dit model zit 81% boven het klassengemiddelde van 153 vergelijkbare modellen.
Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte JCB 220X momenteel van € 69.748 tot € 174.736, met een marktgemiddelde rond € 124.700. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 4 actieve aanbiedingen, dagelijks bijgewerkt.
2 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.
Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.
The JCB 220X is a 23-tonne class crawler excavator producing 173 hp and fitted with a 1.25 m3 bucket capacity. It sits in the mid-size general-purpose excavator segment, positioned to handle a broad range of earthmoving and civil work. The X-series platform represents JCB's reinforced-undercarriage generation, aimed at higher structural durability relative to its predecessors.
Mid-size crawler excavators in this weight class are typically deployed on groundworks, utility trenching, road construction, and site clearance where a balance of reach, lift capacity, and transport weight is required. The 1.25 m3 bucket capacity suits bulk excavation cycles on medium to large civil contracts. Machine versatility in this class is further extended through quick-coupler compatibility with a wide range of attachments, including hydraulic breakers, grapples, and compaction plates.
Inspection of any used 23-tonne class excavator should prioritise the undercarriage, as track wear on crawlers of this operating weight is a significant cost driver and worn components are not always visible in photographs. Request measurement or visual confirmation of track pad thickness, sprocket condition, and roller seal integrity. The hydraulic system warrants close attention: check for external leaks at cylinder rod seals, hose connections, and the swing motor housing. Engine hours should be verified against the machine's ECU readout rather than relying solely on the displayed hour meter, as discrepancies can occur. Review service records for oil sample history, filter change intervals, and any record of boom, arm, or bucket structural repair. Confirm that all auxiliary hydraulic circuits function correctly if the machine is intended for attachment use. On X-series JCB units specifically, inspect the reinforced slew ring and boom foot pins for wear and play, as these are structural load points in demanding applications.
The JCB 220X is routinely cross-shopped against the Hyundai R245 and the Volvo EC210. All three occupy the 21-to-25-tonne operating weight band, though the JCB 220X at 23,190 kg sits slightly heavier than the EC210 and closer to the R245 in mass. The Volvo EC210 is associated with proprietary care programmes and strong dealer network coverage in Western Europe, which can influence buyer preference among fleet operators seeking supported maintenance. The Hyundai R245 is typically considered on upfront-value grounds within the same duty-cycle envelope. Within the JCB 220X segment, the primary attributes that move a unit within its price band are accumulated working hours, service history documentation, undercarriage wear condition, configuration including long-reach or standard boom, and the presence of factory-fitted or compatible attachments. Machines with full dealer-service records and low hours command the stronger end of the band; high-hour units with worn undercarriage or absent service documentation sit at the lower end.
Gemiddelde vraagprijs weergegeven als delta ten opzichte van het klassengemiddelde (€125k).
Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een JCB 220X. Onze keuze, en waarom. Gratis zolang we nieuw zijn.
Aanvraag starten