5,490 kg74 hpMarktgemiddelde €51k · 18 aangeboden · 9 onder de marktprijs
Vraagprijzen liggen tussen €42k en €60k, ongeveer 35% boven het marktgemiddelde.
Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte JCB 525-60 momenteel van € 41.782 tot € 59.900, met een marktgemiddelde rond € 51.221. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 18 actieve aanbiedingen, dagelijks bijgewerkt.
We vergelijken prijs, bouwjaar, draaiuren en geschiktheid. Daarna sturen we je binnen 24 uur een gecontroleerde selectie met directe links naar de verkoper.
Elke rij is een stap die het team doorloopt als je om een model vraagt. De cijfers komen van de live Europese markt: wat we deze week hebben gelezen, wat we zouden markeren, en wat we zouden sturen als je het had gevraagd.
Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.
The JCB 525-60 is a compact telehandler with an operating weight of 5,490 kg and an engine output of 74 hp. It belongs to the light-to-mid class of telescopic handlers, positioned for sites where a smaller footprint and lower axle load are priorities. The machine combines telescopic reach with lift capacity in a format that remains maneuverable on constrained or soft-ground worksites.
Telehandlers in this class are commonly used for material placement on construction sites, agricultural feed and bale handling, and general yard logistics where a forklift cannot access variable terrain. The 525-60 format suits operations that require repeated load cycling across uneven ground without the overhead of a heavier full-size machine. Landscaping, civils groundworks, and smaller infrastructure projects are also typical deployment environments.
Inspection of a used 525-60 should prioritize the telescopic boom section for wear in the sliding pads and any play in the boom crowd cylinder, as these are high-cycle components in daily material-handling work. Check the carriage and headstock for cracks or repairs that indicate overloading history. Hydraulic hose condition along the boom is worth close attention, as abrasion against guide rollers accumulates over time. Verify that all safety systems, including the load management indicator and any overload cutout, are functional and have not been bypassed. Service records that document filter changes, transmission fluid intervals, and axle oil condition materially affect confidence in the drivetrain. Tyre condition is a significant practical cost factor for this machine class; inspect for sidewall damage and uneven wear that may point to axle alignment issues. Where attachments are included, confirm compatibility and check locking pins and hydraulic couplings for wear.
Within the compact telehandler segment, the JCB 525-60 is cross-shopped most directly against the Manitou MT625 and the Merlo P32.6. Compared with the Manitou MT625, the JCB carries a higher operating weight at 5,490 kg versus the lighter MT625 platform, which can indicate greater structural robustness but also higher ground pressure. The Merlo P32.6 competes on reach and load-chart geometry and is often preferred where Italian drivetrain servicing networks are established. JCB's advantage in this comparison is typically the depth of its dealer and parts network in Northern Europe and the UK. Within the price band for any individual example, the primary value drivers are recorded hours, service history documentation, boom wear and cylinder condition, tyre specification and remaining tread, and the presence of attachments such as forks, buckets, or rotators. Configuration differences, including side-shift carriages or integrated weighing systems, also move machines within the spread.
Gemiddelde vraagprijs weergegeven als delta ten opzichte van het klassengemiddelde (€51k).
Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een JCB 525-60. Onze keuze, en waarom. Gratis zolang we nieuw zijn.
Aanvraag starten