Gebruikte Kubota U50: 14 live aanbiedingen, €32k–€37k

Hoeveel kost een gebruikte Kubota U50 in Europa?

Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Kubota U50 momenteel van € 31.750 tot € 37.450, met een marktgemiddelde rond € 34.408. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 14 actieve aanbiedingen, dagelijks bijgewerkt.

Privé verzonden

Mail me deze week de laaggeprijsde Kubota U50.

9 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.

Specificatie · Vergelijking

Hoe de U50 het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

Kubota

U50

In één oogopslag

Gewichtsklasse

5 t

Vermogen

Motor

Kubota D1803-CR-T-E5

Yanmar 4TNV88

Yanmar 4TNV88-XYB

Vermogen

40 hp

36–40 hp

40–41 hp

Afmetingen

Bedrijfsgewicht

4,775 kg

4,730–5,320 kg

4,665–4,950 kg

Lengte

—

5,460–5,523 mm

5,235–5,240 mm

Breedte

1,960 mm

1,960–2,002 mm

1,560–1,962 mm

Hoogte

2,550 mm

2,512–2,560 mm

2,591–2,620 mm

Transportlengte

—

5,464 mm

5,235–5,240 mm

Werkbereik

Bakinhoud

0.13 m³

0.13–0.21 m³

0.23 m³

Max. graafdiepte

3,370 mm

3,570–3,870 mm

3,582–3,590 mm

Max. bereik

5,850 mm

5,970–6,280 mm

5,740–5,752 mm

Zwenkstraal staart

—

1,000–1,003 mm

981 mm

Aandrijving

Rijsnelheid

4.8 km/h

4.3–4.5 km/h

4.6–4.7 km/h

Markt

Gemiddelde vraagprijs · EU

€34k

€22k

—

Prijsklasse

€32k – €37k

€20k – €24k

— – —

Actieve aanbiedingen

14

2

0

Over · Kubota U50

Overzicht

The Kubota U50 is a conventional-tail-swing mini-excavator in the 5-tonne class, combining an operating weight of 4775 kg with a 40 hp engine and a 0.13 m3 bucket capacity. It occupies the upper tier of the compact excavator segment, where machines deliver meaningfully more reach and breakout force than sub-3-tonne units while still fitting within site-access and transport constraints typical of urban and suburban work. The U50 is a recognised platform from Kubota's core excavator range and represents a well-established size class in the used-equipment market.

Typische toepassingen

Waar deze machine wordt gebruikt

Mini-excavators in the 5-tonne class are routinely deployed on utility trenching, drainage installation, landscaping groundworks, and foundation excavation for small structures. Their weight and digging envelope suit confined urban sites, pipeline repair corridors, and agricultural drainage work where larger machines cannot operate efficiently. The 0.13 m3 bucket capacity is well matched to finish grading, trench profiling, and loading into compact dumpers or trucks.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

When inspecting a used 5-tonne mini-excavator of this type, prioritise a full review of the service history and hour-meter consistency. Examine the undercarriage carefully: track pad wear, roller condition, and final-drive integrity are primary cost drivers in this class and are not immediately visible without hands-on inspection. Check the slew ring for play and noise under load. Inspect all hydraulic lines, cylinders, and seals for weeping or deterioration, and test auxiliary hydraulic circuits if present. Review the boom, dipper, and bucket pins and bushings for wear. Confirm that any quick-coupler or fitted attachments are compatible and in serviceable condition. A pre-purchase inspection by an independent engineer is advisable, particularly for machines where service documentation is incomplete.

Huidige markt

Prijspositie

Within the 5-tonne mini-excavator class the Kubota U50 is most directly cross-shopped against the New Holland E50 and the Hitachi ZX50U. All three machines compete in the same weight and power band, so buyers typically evaluate them on build reputation, parts-network coverage, and available configuration rather than raw output figures alone. The Kubota U50's conventional tail-swing geometry distinguishes it in practical terms from zero- or reduced-tail-swing variants in this class, affecting suitability for tight-boundary work. Within this segment, position in the price band is primarily driven by recorded operating hours, overall mechanical and structural condition, the presence of a quick-coupler or auxiliary hydraulics, bucket and attachment inventory, cab specification including climate control, and provenance of service history. Machines with documented maintenance records and low accumulation of hours consistently attract stronger buyer interest regardless of model.

Hoe we de markt analyseren →

Blijf in het bereik