Over · Liebherr A910Overzicht
The Liebherr A910 is a mid-range wheeled excavator produced by the German manufacturer Liebherr, sitting in the lower-middle segment of the wheeled-excavator class by operating weight. Designed for road-legal site mobility combined with full excavator capability, it bridges the gap between compact wheeled units and larger road-construction machines. Its wheeled undercarriage allows it to self-propel between work areas without a low-loader, a practical advantage on linear or multi-point projects.
Typische toepassingenWaar deze machine wordt gebruikt
Wheeled excavators in this class are routinely deployed on utility trenching, drainage installation, and road-maintenance work where frequent repositioning across sealed or prepared surfaces is required. Municipal and civil contractors favour the configuration for pipeline laying, kerb and gutter work, and light demolition where tracked machines would cause surface damage. The machine's reach and slew characteristics also make it suitable for loading trucks and material handling in confined urban sites.
Tweedehandsmarkt inspectieWat je moet controleren voordat je koopt
Inspect the slew ring for play and uneven wear, as replacement is a significant intervention on any wheeled excavator of this class. Check all hydraulic cylinders for seal weep and scored chrome on the boom, dipper, and bucket circuits. On wheeled units specifically, examine tyre wear pattern for signs of alignment issues and inspect the axle joints and steering linkages for play. Verify that all outrigger pads extend and retract smoothly and that the locking pins show no excessive wear. Request a full service history and cross-reference the hour meter reading with wear indicators on the cab interior, pedal rubbers, and seat. A pre-purchase inspection by an independent engineer with access to a diagnostic tool compatible with the Liebherr system is advisable before commitment.
Huidige marktPrijspositie
The A910 competes directly with machines such as the Volvo EW140, Caterpillar M315, Hyundai R140W, and JCB JS145W in the mid-range wheeled-excavator segment. Compared with the Volvo EW140 and Caterpillar M315, the Liebherr product is typically noted for its in-house manufactured components and European service network, while the JCB JS145W is often cross-shopped on parts availability in certain markets. Within any given condition tier, the attributes that move a machine higher or lower in its price band include accumulated service hours, the presence or absence of a quick-coupler system, auxiliary hydraulic lines, outrigger configuration, cab specification, tyre condition and remaining tread, and the completeness of the service history. Machines with factory-fitted attachments such as grading blades or hammer lines command a premium over base-configuration units, while high-hour examples with no documented maintenance record sit at the lower end of the spread regardless of cosmetic appearance.
