Prijs gebruikte Manitou MRT2150: €44k–€109k in Europa

Hoeveel kost een gebruikte Manitou MRT2150 in Europa?

Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Manitou MRT2150 momenteel van € 44.000 tot € 108.700, met een marktgemiddelde rond € 68.430. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 12 actieve aanbiedingen, dagelijks bijgewerkt.

Gratis selectie voor kopers

De beste beschikbare deals voor Manitou MRT2150 in Europa.

We vergelijken prijs, bouwjaar, draaiuren en geschiktheid. Daarna sturen we je binnen 24 uur een gecontroleerde selectie met directe links naar de verkoper.

Specificatie · Vergelijking

Hoe de MRT2150 het doet in zijn klasse.

Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.

Manitou

MRT2150

In één oogopslag

Gewichtsklasse

—

Vermogen

Motor

—

Vermogen

—

Afmetingen

Bedrijfsgewicht

—

Lengte

—

Breedte

—

Hoogte

—

Werkbereik

Max. hefinvermogen

—

Max. hefhoogte

—

Max. bereik

—

Hefcapaciteit bij max. bereik

—

Aandrijving

Rijsnelheid

—

Markt

Gemiddelde vraagprijs · EU

€68k

Prijsklasse

€44k – €109k

Actieve aanbiedingen

12

Over · Manitou MRT2150

Overzicht

The Manitou MRT2150 is a rotating telehandler, a machine class that combines the reach and lift capacity of a conventional telescopic handler with a 360-degree slewing superstructure, allowing work across a full circle without repositioning the carrier. It sits at the upper end of the rough-terrain rotating telehandler segment, designed for demanding lifting operations where a static telehandler or crane would be less flexible. The MRT designation identifies it as part of Manitou's rotating handler lineup, differentiated from the non-rotating MT series by its slewing capability and typically higher lift height and capacity ratings.

Typische toepassingen

Waar deze machine wordt gebruikt

Rotating telehandlers in this class are well suited to construction sites, industrial installations, and infrastructure projects where materials or loads must be placed precisely at height and across a wide horizontal arc. They are regularly deployed for steel erection, facade work, precast concrete placement, and wind-energy installation support where continuous repositioning of a conventional machine would create unacceptable downtime. The MRT2150 class also finds use in rental fleets serving civil engineering contractors who require a machine that can substitute for a small mobile crane on confined sites.

Tweedehandsmarkt inspectie

Wat je moet controleren voordat je koopt

Inspection of a used rotating telehandler should begin with the slewing ring and its bearing surfaces, as wear or play in this assembly is both a safety concern and a significant repair item. The telescopic boom sections should be examined for straightness, wear-pad condition, and any signs of cracking or weld repair, particularly around the pivot points and the knuckle where rotation occurs. Hydraulic cylinder seals, hose routing, and the condition of the outrigger pads and their locking mechanisms warrant close attention, since hydraulic leaks and outrigger defects can ground the machine immediately. Confirm that the load management indicator and safety interlock systems are fully operational, as regulatory compliance depends on them. Request a full service history and check that scheduled maintenance intervals have been observed. Where attachments are included, verify that they are rated and documented for use with this specific machine, as mismatched attachments affect both safety and insurability.

Huidige markt

Prijspositie

The MRT2150 competes in the upper rotating telehandler segment alongside machines such as the JLG 4017RS, the Merlo Roto series, and the Liebherr TL432-13. Against non-rotating high-reach telehandlers it offers the slewing advantage but typically carries a higher acquisition and operating cost profile as a trade-off. Within the used market for this specific model, the attributes that move a machine within its price band are accumulated working hours, service history documentation, the presence and condition of attachments such as jibs, forks, and winches, whether the machine carries a current inspection certificate, and overall structural and hydraulic condition. Configuration details, including whether a machine is fitted with outriggers, fly-jib extensions, or a hook block, materially affect its utility and therefore its comparative market position. Machines with lower hours, full service records, and a verified attachment set consistently occupy the stronger end of the value range, while high-hour units with incomplete documentation or worn wear parts sit at the lower end regardless of cosmetic appearance.

Hoe we de markt analyseren →

Blijf in het bereik