20,700 kg272 hpMarktgemiddelde €54k · 14 aangeboden · 10 onder de marktprijs
Vraagprijzen liggen tussen €44k en €60k, ongeveer 7% boven het marktgemiddelde.
Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Volvo L120 momenteel van € 43.910 tot € 60.220, met een marktgemiddelde rond € 53.535. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 14 actieve aanbiedingen, dagelijks bijgewerkt.
10 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.
Elke rij is een stap die het team doorloopt als je om een model vraagt. De cijfers komen van de live Europese markt: wat we deze week hebben gelezen, wat we zouden markeren, en wat we zouden sturen als je het had gevraagd.
Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.
The Volvo L120 is a large articulated wheel loader in the 20-tonne operating class, producing 272 hp and carrying a standard bucket capacity of 3.7 m³. It has been in continuous production since 1991, a production run that reflects broad market acceptance across multiple generations of the design. The machine sits at the upper end of the mid-large loader segment, positioned for high-volume material handling where both payload capacity and cycle efficiency are priorities.
The L120 is well suited to bulk material handling in quarrying, aggregates, and construction earthworks, where its bucket volume and operating weight provide effective productivity in load-and-carry and face-loading cycles. It is also a common choice for port and terminal operations, waste and recycling facilities, and large infrastructure projects requiring continuous stockpile management. The power-to-weight ratio makes it capable across a range of underfoot conditions typically encountered in these environments.
Inspection of a used L120 should prioritise the condition of the articulation joint and its bearings, as this is a high-wear point common to all articulated loaders of this class. The boom arms, lift cylinders, and tilt linkage should be checked for cracks, wear, and seal integrity. The transmission and axles warrant particular attention given the duty cycles typical of this machine size. Buyers should request full service history and verify filter and oil change intervals have been maintained. Cab condition, visibility aids, and the state of the quick-coupler system if fitted are relevant to both operator productivity and residual value. Tyre wear and condition represent a significant factor in assessing overall machine value, and all hydraulic circuits should be pressure-tested rather than inspected visually alone.
The L120 competes directly with the Caterpillar 962 and the JCB 457, all three machines occupying the same broad operating-weight and productivity class. Against the Caterpillar 962, the L120 is frequently evaluated on differences in drivetrain architecture, cab ergonomics, and dealer support network density in a given region. Against the JCB 457, buyers typically compare lift geometry, bucket fill characteristics, and total cost of ownership profiles. Within the L120 segment itself, the attributes that move a specific machine within its price band are accumulated service hours, configuration choices such as high-tip or rehandling bucket fitment, the presence of quick-coupler systems and additional attachments, overall mechanical condition, service history documentation, and whether the machine carries current safety certifications. Newer production years command a premium over earlier generations of the same model line.
Gemiddelde vraagprijs weergegeven als delta ten opzichte van het klassengemiddelde (€54k).
Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een Volvo L120. Onze keuze, en waarom. Gratis zolang we nieuw zijn.
Aanvraag starten