5,190 kg75 hpMarket avg. €38k · 11 listed · 4 below market
Asking prices land at €35k – €40k, around 53% below the market average.
Across independent European dealers, used Wacker Neuson DW90 listings currently run from €35,000 to €40,000, with a market average around €37,591. Year, operating hours and configuration move the price within that band. Based on 11 active listings, refreshed daily.
4 below-market asks right now. We write back within 15 minutes with the strongest matches for your spec.
Each row is a step the desk runs through when you ask for a model. Counts come from the live European market: what we read this week, what we'd flag, and what we'd send if you'd asked.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Wacker Neuson DW90 is a compact articulated dump truck with an operating weight of 5,190 kg and an engine output of 75 hp. It sits in the lower-capacity segment of the articulated dump truck class, designed to deliver a balance of maneuverability and payload capacity in a relatively tight footprint. The DW90 is a Wacker Neuson product, a manufacturer with an established position in compact construction equipment, and the model competes directly in the sub-6-tonne ADT category.
Compact articulated dump trucks in this weight and power class are well suited to earthmoving, bulk material transport, and site-clearance tasks where larger rigid or full-size articulated haulers cannot operate efficiently. Typical deployment environments include landscaping projects, drainage and utility works, urban construction sites with restricted access, and agricultural or estate groundworks. The articulated chassis allows the machine to navigate soft, uneven, or confined terrain that would challenge conventional dumper configurations.
When inspecting a used compact articulated dump truck such as the DW90, priority areas include the articulation joint and steering cylinder condition, as these components are subject to continuous stress and wear in normal operation. The hydraulic system, including hoses, rams, and the tipping circuit, should be cycled fully and checked for leaks or sluggish response. Drivetrain and axle condition deserve close attention given the four-wheel-drive demands typical of this machine class, and any signs of differential or transfer-case wear should be evaluated carefully. Engine condition should be assessed for oil leaks, coolant integrity, and clean exhaust, and all service intervals should be verified against available documentation. Tyre wear and the condition of the dump body, including any cracking or stress deformation from heavy use, are practical indicators of how the machine has been worked. A full operational test on representative terrain is strongly advisable before committing to purchase.
Within the sub-6-tonne articulated dump truck segment, the Wacker Neuson DW90 is most commonly cross-shopped against the Hydrema 922F and the Hydrema 912D. The Hydrema models carry a strong reputation in the ADT niche and are considered direct competitors on capacity and application fit. Where the DW90 differentiates itself, buyers should assess engine output at 75 hp and operating weight at 5,190 kg against the Hydrema specifications to determine the most appropriate match for their operational requirements. Within the used market, the attributes that move any individual DW90 up or down within its price band include accumulated service hours, overall mechanical condition, configuration choices such as body type or drive system, the presence or absence of attachments, and documented maintenance history. Machines with lower hours, complete service records, and original or well-maintained attachments will consistently attract stronger interest than high-hour or poorly documented examples.
Market average ask shown as delta against the class average (€38k).
We'll read the European market and send three to seven real options for a Wacker Neuson DW90. Our pick, and why. Free while we're new.
Start a request