3,965 kg46 hpLimited recent data, based on 1 older listings
Based on 1 older listings. Current pricing may have shifted, so we show the class range instead.
Most asking prices land between €10k – €62k, with a market average around €22k.
This model sits 43% below the class average across 50 peer models.
We write back within 15 minutes with the strongest matches for your spec.
Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.
The Hamm HD13 is a tandem vibratory roller in the light compactor class, with an operating weight of 3965 kg and an engine output of 46 hp. It is a purpose-built asphalt and soil compaction machine suited to construction and civil engineering applications. Hamm is a recognised European manufacturer in the road and ground compaction segment, and the HD13 represents a mid-range offering within its tandem drum lineup.
Light tandem vibratory rollers of this class are commonly deployed on road resurfacing, car park construction, footpath and cycle lane work, and general site preparation where precise, controlled compaction is required. Their operating weight and drum width make them well suited to confined or access-restricted worksites where larger machines cannot operate efficiently. Contractors in municipal works, utility reinstatement, and small-to-medium paving projects regularly specify machines in this weight category.
When inspecting a used tandem roller of this class, priority checks should cover drum condition, including visible cracks, flat spots, or uneven wear on both front and rear drums, as drum repair or replacement is a significant cost item. Vibration system functionality should be verified under load, as worn eccentric bearings are a common service item on machines of this type. Engine hours should be cross-referenced against available service records, and the condition of scrapers, water spray systems, and rubber mounts should be assessed. A full walk-around inspection for frame cracks, particularly around articulation joints, is advisable before purchase.
European market pricing for the Hamm HD13 centres on EUR 16616, with a typical transaction range running from EUR 16446 to EUR 16786, indicating a relatively tight spread and consistent demand in the used market. Comparable machines in this segment include the JCB VMT380 and the Bomag BW135, both of which compete directly on operating weight class and application profile. Buyers evaluating the HD13 against these alternatives should assess condition, service history, and drum integrity alongside headline price when making comparisons.
Market average ask shown as delta against the class average (€16k).
We'll read the European market and send three to seven real options for a Hamm HD13. Our pick, and why. Free while we're new.
Start a request