Over · Volvo A40GOverzicht
The Volvo A40G is a large articulated dump truck (ADT) in the 40-tonne payload class, designed for high-volume bulk material haulage on off-road and rough-terrain worksites. It is powered by a Volvo engine driving through an automatic transmission and features all-wheel drive with independent front suspension and a rear walking-beam axle arrangement that keeps all six wheels in ground contact across uneven terrain. The A40G generation introduced updated cab ergonomics, an on-board weighing system, and refined automatic traction control compared with its predecessors, positioning it at the top of the Volvo ADT range.
Typische toepassingenWaar deze machine wordt gebruikt
The A40G is suited to large earthmoving operations including quarrying, open-pit mining, civil infrastructure, dam and reservoir construction, and major road and highway schemes where high-cycle, high-volume haulage is required. Its articulated frame and six-wheel-drive system allow it to operate on haul roads and in conditions where rigid dump trucks would lose traction or damage the ground surface. The machine is commonly paired with large hydraulic excavators or wheel loaders acting as loading units on multi-machine fleets.
Tweedehandsmarkt inspectieWat je moet controleren voordat je koopt
Buyers should request a complete service history and verify hours against the machine's ECU data rather than relying solely on the instrument display, as hour-meter replacements are not uncommon in high-utilisation fleets. The articulation joint and its seals deserve close inspection, as wear here affects steering precision and can be costly to rectify. Tyre condition is a significant factor in the A40G class given the size and specification of the six tyres required. The rear walking-beam axle and its pivot bushings should be checked for play and lubrication history. Inspect the body floor and tailgate for wear-liner condition and structural cracking, particularly in machines that have handled rock rather than soft material. Review onboard fault-code history through a Volvo-compatible diagnostic tool before purchase, and confirm that the automatic traction control and on-board weighing systems are fully functional. Wherever possible, commission an independent pre-purchase inspection by a technician experienced with Volvo ADT drivetrains.
Huidige marktPrijspositie
Within the 40-tonne articulated dump truck class the A40G is cross-shopped primarily against the Caterpillar 740 and 745, the Komatsu HM400, and the Bell B40E. Compared with the Bell B40E, which is derived from Mercedes-Benz truck engineering, the Volvo uses a proprietary driveline and suspension geometry that some operators prefer for parts-supply consistency within all-Volvo fleets. Against the Caterpillar 740 series, the A40G competes on payload rating, cab specification, and traction-management technology, with fleet buyers often evaluating total ownership cost across comparable service intervals. Within the used market, the attributes that move an individual machine within its price band include recorded engine and transmission hours, full-service history documentation, tyre condition and remaining tread depth, the presence or absence of an on-board weighing system, body liner specification, whether the machine has operated in abrasive or corrosive environments such as quarry rock or coastal fill, and geographic availability relative to the buyer. Machines in documented single-owner fleet operation with complete dealer service records command stronger positioning than those with fragmented or unknown histories.
