2,491 kg21 hpMarktgemiddelde €28k · 8 aangeboden · 3 onder de marktprijs
Vraagprijzen liggen tussen €16k en €36k, ongeveer 13% boven het marktgemiddelde.
Dit model zit 11% boven het klassengemiddelde van 191 vergelijkbare modellen.
Bij onafhankelijke Europese dealers lopen de prijzen voor een gebruikte Volvo ECR25 momenteel van € 16.410 tot € 36.200, met een marktgemiddelde rond € 28.425. Bouwjaar, draaiuren en configuratie bepalen de prijs binnen dat bereik. Gebaseerd op 8 actieve aanbiedingen, dagelijks bijgewerkt.
3 aanbiedingen onder de marktprijs nu. We sturen je binnen 15 minuten een bericht terug met de beste resultaten die aan je criteria voldoen.
Dichtstbijzijnde concurrenten automatisch geselecteerd op categorie en gewichtsklasse. Specificaties van fabrikantsdatasheets; prijzen van recente dealeraanbiedingen.
The Volvo ECR25 is a compact, tail-swing-reduced mini-excavator in the two-and-a-half-tonne class, designed for confined-site productivity without sacrificing structural rigidity. It operates at 2491 kg and develops 21 hp, placing it firmly among entry-level professional compact excavators suited to urban and light civil applications. The 0.074 m3 bucket capacity is representative of the class and aligns with precise, controlled digging rather than high-volume bulk excavation.
Machines in this weight and power bracket are routinely deployed on utility trenching, landscaping, foundation work in restricted access areas, and indoor demolition where door-width clearance and floor-load limits are critical. The reduced-tail-swing configuration allows the ECR25 to rotate within tight envelopes such as roadside trenches, walled courtyards, and occupied sites where adjacent structures or traffic limit swing radius. Secondary applications include pipe laying, cable ducting, and general site preparation on projects where a larger machine cannot safely or legally operate.
Prospective buyers should verify the condition of the undercarriage, including rubber track wear, drive motor seals, and roller condition, as these are the primary wear components on machines in this class. Hydraulic system inspection should cover cylinder rod condition for corrosion or scoring, hose routing for chafing, and any evidence of slow or uneven boom, arm, or bucket response. Engine hours should be cross-referenced against service records where available. Buyers should confirm whether the machine retains its original bucket or has been operated primarily with alternative attachments, which affects pin and bushing wear at the coupler point. Cab or canopy condition, including ROPS certification status, is a practical compliance consideration for many worksites. Finally, any machine offered with additional hydraulic circuits should be verified for full function before purchase.
The ECR25 competes directly with the Wacker Neuson ET24 and the Kubota U27. The Wacker Neuson ET24 sits slightly below the ECR25 in operating weight and offers a comparable power output, making it a close substitute in the sub-2500 kg segment. The Kubota U27, at roughly the same power tier, positions itself with a strong dealer-service network argument and is often cross-shopped by buyers prioritising parts availability over brand preference. The ECR25 differentiates itself through Volvo's construction-grade build standards and its reduced-tail-swing geometry, which is a specific design priority rather than an afterthought. Within the ECR25 market, attributes that move a unit through its price band include recorded service hours, the presence of a quick-coupler or hydraulic thumb, additional attachment circuits, undercarriage condition, cabin configuration such as ROPS canopy versus enclosed cab, and overall machine condition including paint integrity and structural inspection history.
Gemiddelde vraagprijs weergegeven als delta ten opzichte van het klassengemiddelde (€28k).
Het team monitort de Europese markt en stuurt drie tot zeven echte opties voor een Volvo ECR25. Onze keuze, en waarom. Gratis zolang we nieuw zijn.
Aanvraag starten