Over · Volvo L70Overzicht
The Volvo L70 is a mid-range articulated wheel loader with an operating weight of 13,960 kg and a rated engine output of 170 hp, positioning it firmly in the 13-to-15-tonne class of general-purpose loading equipment. Standard bucket capacity is 2 m³, which aligns the machine with a broad range of material-handling and earthmoving demands. The model has been in continuous production since 1986, giving the platform an exceptionally long service history and a well-documented parts and support network.
Typische toepassingenWaar deze machine wordt gebruikt
Machines in this weight and capacity class are routinely deployed in quarry face loading, aggregate stockpile management, road construction support, and municipal infrastructure work. The 2 m³ bucket and 170 hp power rating make the L70 suitable for handling bulk materials such as sand, gravel, crushed stone, and topsoil in cycle-intensive environments. It is also used in timber yards, recycling facilities, and light demolition clearance where an articulated loader of this size offers a practical balance of reach, manoeuvrability, and payload.
Tweedehandsmarkt inspectieWat je moet controleren voordat je koopt
Inspection of any used wheel loader in this class should begin with a thorough check of the articulation joint and the steering cylinder seals, as these are high-stress points on any machine with substantial operating hours. The hydraulic system should be tested for smooth lift and tilt response with no drift when the loader arm is held under load. Engine coolant and hydraulic fluid should be sampled and analysed where possible, as fluid condition is one of the more reliable indicators of maintenance discipline. Tyre condition deserves close attention given the replacement cost associated with tyres suited to a 13,960 kg machine. Examine the bucket cutting edge, side cutters, and the attachment coupler if fitted, as these wear items affect immediate usability. Frame cracks around the pivot point and rear chassis mounting areas warrant careful visual and, where warranted, dye-penetrant inspection. Finally, confirm that all service documentation, including filter and fluid change intervals, is present and consistent with the hours shown on the hour meter.
Huidige marktPrijspositie
The Volvo L70 is cross-shopped most directly against the Caterpillar 930 and the Doosan DL250, both of which compete in a similar operating-weight and power bracket. Relative to the Caterpillar 930, the L70 carries a higher published operating weight, which influences stability and payload confidence on uneven ground. Against the Doosan DL250, the Volvo brand historically commands recognition for drivetrain longevity and dealer network depth in European and Scandinavian markets. Within the L70 segment itself, the attributes that move a machine within its price band are accumulated service hours, configuration variant, the presence and condition of attachments such as forks or high-tip buckets, service history documentation, tyre wear, and overall structural and hydraulic condition. Machines with comprehensive service records, lower hours, and matched original attachments consistently occupy the stronger end of the valuation range.
