Used Caterpillar 906: 18 live listings, €33k–€70k

How much does a used Caterpillar 906 cost in Europe?

Across independent European dealers, used Caterpillar 906 listings currently run from €33,284 to €69,950, with a market average around €45,669. Year, operating hours and configuration move the price within that band. Based on 18 active listings, refreshed daily.

Private dispatch

Email me the under-priced Caterpillar 906 this week.

12 below-market asks right now. We write back within 15 minutes with the strongest matches for your spec.

Specification · Comparison

How the 906 lines up in its class.

Nearest competitors auto-selected by category and weight class. Specs from manufacturer datasheets; prices from recent dealer listings.

Caterpillar

906

At a glance

Weight class

6 t

5 t

Power

Engine

Cat C3.3B / C3.4

Liebherr D 504

Volvo D3.3J / Deutz BF4L 1011FT (early)

Power

68–70 hp

60–68 hp

58–75 hp

Dimensions

Operating weight

4,950–5,640 kg

5,240–5,835 kg

4,761–5,500 kg

Length

5,040–5,640 mm

5,300–5,400 mm

5,298–5,500 mm

Width

1,829–1,872 mm

2,050 mm

1,759–1,900 mm

Height

2,469–2,682 mm

2,700–2,780 mm

2,580–2,707 mm

Working range

Bucket capacity

0.61–1.2 m³

0.8–1.6 m³

0.8–1.5 m³

Breakout force

42–46 kN

44–48 kN

43–55 kN

Lift height

3,120–3,220 mm

2,550 mm

3,217–3,260 mm

Drive

Travel speed

19–35 km/h

20–30 km/h

30 km/h

Market

Market average ask · EU

€46k

€33k

€31k

Price range

€33k – €70k

€33k – €34k

€20k – €49k

Active listings

18

3

12

About · Caterpillar 906

Overview

The Caterpillar 906 is a compact wheel loader in the sub-6-tonne class, combining an operating weight of 5,599 kg with an engine output of 68 hp. Its 0.9 m3 bucket capacity positions it at the productive end of the small wheel loader segment, suited to operators who require genuine material-handling capability without the footprint of a mid-size machine. Built to Cat's established driveline and hydraulic standards, the 906 represents a widely recognised entry point into the Caterpillar wheel loader range.

Typical applications

Where this machine is used

Compact wheel loaders of this class are regularly deployed in agricultural yards, landscaping operations, municipal works, and light construction sites where maneuverability in confined spaces is a priority. The 0.9 m3 bucket makes the 906 capable of handling aggregates, soil, woodchip, and loose bulk materials at a productive cycle rate. Its power-to-weight ratio also supports pallet fork and sweeper attachment work, broadening its utility across mixed-duty environments.

Used-market inspection

What to check before buying

Inspection of a used Caterpillar 906 should begin with a full walk-around for structural cracks at the articulation joint and loader arms, as these areas absorb the greatest cyclic stress in daily loading work. Check hydraulic cylinder seals and hose routing for leaks, and operate the bucket through full curl and lift cycles to confirm smooth, consistent response without cavitation noise. Tyre condition is a significant cost variable on compact wheel loaders, so assess remaining tread depth and sidewall integrity carefully. Request service records to verify filter and fluid change intervals, and confirm that the quick-coupler mechanism, if fitted, locks and releases positively under load. A cold-start inspection is advisable to observe initial oil pressure response and to identify any blue or white exhaust smoke that may indicate internal engine wear.

Current market

Price position

Within the compact wheel loader segment, the Caterpillar 906 is most commonly cross-shopped against the Volvo L30 and the Liebherr L507. The 906 carries a modest weight advantage over both in this class grouping, while its 68 hp engine output and 0.9 m3 bucket sit in the same competitive band. The Liebherr L507 is often noted for its articulation geometry and cab ergonomics, while the Volvo L30 competes on driveline refinement and service network coverage. Within any group of 906 units on the market, the attributes that move a machine through its price band are accumulated operating hours, service history documentation, tyre condition and remaining tread depth, the presence of quick-coupler systems, and the specification of additional attachments such as forks or high-tip buckets. Configuration choices, including cab versus canopy and manual versus ride-control hydraulics, also influence where a given unit sits relative to others of the same model year.

How we read the market →

Stay in the range